Software-based VM-centric and flash-friendly VM storage + free version
Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)
-
lipoufski
- Posts: 1
- Joined: Mon Aug 18, 2008 1:47 pm
Mon Aug 18, 2008 1:55 pm
I plan on setting up an HP DL320s server with 3TB of local storage. I will be doing boot to SAN using Qlogic adapters. I have tested this and it seems to work quite well.
I was planning on purchasing an Overland REO 4000 Disk Unit that is ISCSI based, and would like to mirror all my local disk to this unit. So can I just mount it using ISCSI and store my mirrors there, and if need be can I create ISCSI targets on an ISCSI disk?
Thanks
-
aaron (staff)
- Posts: 70
- Joined: Fri Jan 11, 2008 6:13 am
- Location: BVI
Mon Aug 18, 2008 5:07 pm
You need to wait for StarPort with iSCSI mirroring feature to do this. It will allow to RAID1 your local image (partition) and remote iSCSI target controlled one.
lipoufski wrote:I plan on setting up an HP DL320s server with 3TB of local storage. I will be doing boot to SAN using Qlogic adapters. I have tested this and it seems to work quite well.
I was planning on purchasing an Overland REO 4000 Disk Unit that is ISCSI based, and would like to mirror all my local disk to this unit. So can I just mount it using ISCSI and store my mirrors there, and if need be can I create ISCSI targets on an ISCSI disk?
Thanks
Regards,
Aaron Korfer
Sales & Support
Rocket Division Software
