P:2V Windows 11 to ESXI 8 - hostname instead of IP address

VM image converter (VMDK, VHD, VHDX, IMG, RAW, QCOW and QCOW2), P2V migrator
Post Reply
swasilewski
Posts: 5
Joined: Mon Nov 03, 2025 8:12 pm

Mon Nov 03, 2025 8:22 pm

I'm testing the software to see if we want to start using it, and I'm trying to P2V a Windows 11 computer onto VMWare ESXI 8. I installed the software without any problems, but when I run it, I go through the steps as outlined in the FAQ here: https://www.starwindsoftware.com/v2v-he ... erver.html , but when I get to the step where I need to enter the ESXI connection parameters, it asks me for the hostname and not the IP address. I've tried entering the hostname of the server and the IP address of the server, and no matter what I do, it flashes "Connecting, please wait..." for a second, then that goes away, and a few seconds later the app just closes.

I'm running what I think is the latest version of the software - 9.0.1.772. I downloaded it last week and I'm just starting to test now. Is there some way I can get it to ask for IP address instead of hostname? I've even tried updating the hosts file on the computer to see if it would go through, but the same result every time. Is what I'm trying to do even possible? is there a way to install it so I can enter the IP instead of the hostname?
Top
yaroslav (staff)
Staff
Posts: 4309
Joined: Mon Nov 18, 2019 11:11 am

Mon Nov 03, 2025 10:15 pm

Welcome to StarWind Forum! You can just type IP in that box.
Top
swasilewski
Posts: 5
Joined: Mon Nov 03, 2025 8:12 pm

Mon Nov 03, 2025 11:41 pm

I've tried that - it says "Connecting" for a second, then nothing for a few more seconds, then the whole app just closes. I've tried it on two different computers with the same result.
Top
yaroslav (staff)
Staff
Posts: 4309
Joined: Mon Nov 18, 2019 11:11 am

Mon Nov 03, 2025 11:47 pm

Thanks for your update. Please share the conversion logs.
Try disk2VHD > convert the VHD as a local VMDK and create the VM on the destination host.
Top
swasilewski
Posts: 5
Joined: Mon Nov 03, 2025 8:12 pm

Tue Nov 04, 2025 4:54 pm

Where do I find the conversion logs? It hasn't converted anything, so I'm not sure what they'll show.

I did try changing the hostname of the VMWare box. Now it doesn't crash, but when it tries to connect, I get a message that says "no data".

I also tried making a disk file but we have nothing that can hold a file that size (approx. 500GB). Only the server we're trying to convert to.
Top
yaroslav (staff)
Staff
Posts: 4309
Joined: Mon Nov 18, 2019 11:11 am

Tue Nov 04, 2025 5:04 pm

Strange. https://drive.google.com/file/d/1hDP4gl ... Ea_5p/view
Try the older version please.
The logs are under C:\Program Files \StarWind \StarWind V2V Converter\logs
Top
swasilewski
Posts: 5
Joined: Mon Nov 03, 2025 8:12 pm

Wed Nov 05, 2025 8:13 pm

I'm trying to attach the log files, but it says "invalid file extension". How am I supposed to attach them if the attachment doesn't work?
Top
yaroslav (staff)
Staff
Posts: 4309
Joined: Mon Nov 18, 2019 11:11 am

Wed Nov 05, 2025 9:34 pm

Copy their contents here.
Top
swasilewski
Posts: 5
Joined: Mon Nov 03, 2025 8:12 pm

Wed Nov 05, 2025 10:06 pm

Here's the latest one:
11/4 10:30:06.771 3500 Facility ???INFO: CV2V_ConverterApp::InitInstance: SetDllDirectory: C:\Program Files\StarWind Software\StarWind V2V Converter\lib
11/4 10:30:06.771 3500 Facility ???INFO: CV2V_ConverterApp::InitInstance: File Version: 9.0.1.772
11/4 10:30:06.776 3500 Facility ???INFO: CV2V_ConverterApp::InitInstance: Load language IDR_XML_ENGLISH
11/4 10:30:06.776 3500 Facility ???INFO: CV2V_ConverterApp::InitInstance: Set current language English
11/4 10:30:06.782 3500 Facility ???INFO: CPS_V2V_Converter::CPS_V2V_Converter: Version MajorVersion 10, MinorVersion 0, BuildNumber 26200
11/4 10:30:06.787 3500 Facility ???INFO: WrapperHyperV::WrapperHyperV: LoadLibrary C:\WINDOWS\system32\wbem\wmiutils.dll - 4f9d0000
11/4 10:30:06.788 3500 Facility ???INFO: WrapperHyperV::WrapperHyperV: LoadLibrary C:\WINDOWS\system32\wbem\wmiutils.dll - 4f9d0000
11/4 10:30:26.097 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eSynchronization
11/4 10:30:32.360 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eAWSConnectionTo
11/4 10:30:34.047 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eLocationTo
11/4 10:30:35.375 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eVMSettingsAWS
11/4 10:30:59.139 143c Facility ???INFO: WrapperESXI::connect: m_url - https://mbvmware.ottawa.local/sdk
11/4 10:31:02.366 143c Facility ???ERROR: WrapperESXI::connect: m_proxy->RetrieveServiceContent fail - 28
11/4 10:31:02.366 143c Facility ???ERROR: getErrorFromSOAP: soap_sprint_fault - SOAP 1.1 fault SOAP-ENV:Server [no subcode]
"No Data"
Detail: get host by name failed in tcp_connect()
11/4 10:31:02.366 143c Facility ???ERROR: VMConverter::ESXIConverter::Connection: connect fail - 28
11/4 10:31:10.553 143c Facility ???WARNING: CPPESXConnectionTo::onNext: connect No Data
11/4 10:31:19.378 3c14 Facility ???INFO: WrapperESXI::connect: m_url - https://211.93.1.10.ottawa.local/sdk
11/4 10:31:19.379 3c14 Facility ???ERROR: WrapperESXI::connect: m_proxy->RetrieveServiceContent fail - 28
11/4 10:31:19.379 3c14 Facility ???ERROR: getErrorFromSOAP: soap_sprint_fault - SOAP 1.1 fault SOAP-ENV:Server [no subcode]
"Host not found"
Detail: get host by name failed in tcp_connect()
11/4 10:31:19.379 3c14 Facility ???ERROR: VMConverter::ESXIConverter::Connection: connect fail - 28
11/4 10:31:22.724 3c14 Facility ???WARNING: CPPESXConnectionTo::onNext: connect Host not found
11/4 10:31:30.227 3bd8 Facility ???INFO: WrapperESXI::connect: m_url - https://mbvmware/sdk
11/4 10:31:34.562 3bd8 Facility ???ERROR: WrapperESXI::connect: m_proxy->RetrieveServiceContent fail - 28
11/4 10:31:34.562 3bd8 Facility ???ERROR: getErrorFromSOAP: soap_sprint_fault - SOAP 1.1 fault SOAP-ENV:Server [no subcode]
"No Data"
Detail: get host by name failed in tcp_connect()
11/4 10:31:34.562 3bd8 Facility ???ERROR: VMConverter::ESXIConverter::Connection: connect fail - 28
11/4 10:48:08.898 3bd8 Facility ???WARNING: CPPESXConnectionTo::onNext: connect No Data
11/4 10:48:11.300 13d4 Facility ???INFO: WrapperESXI::connect: m_url - https://mbvmware/sdk
11/4 10:48:16.360 13d4 Facility ???ERROR: WrapperESXI::connect: m_proxy->RetrieveServiceContent fail - 28
11/4 10:48:16.360 13d4 Facility ???ERROR: getErrorFromSOAP: soap_sprint_fault - SOAP 1.1 fault SOAP-ENV:Server [no subcode]
"No Data"
Detail: get host by name failed in tcp_connect()
11/4 10:48:16.360 13d4 Facility ???ERROR: VMConverter::ESXIConverter::Connection: connect fail - 28
11/4 10:48:17.658 13d4 Facility ???WARNING: CPPESXConnectionTo::onNext: connect No Data
11/4 10:48:19.015 3500 Facility ???INFO: ICPPage::OnWizardBack: SetActivePage - eLocationTo
11/4 10:48:21.710 3500 Facility ???INFO: ICPPage::OnWizardBack: SetActivePage - eAWSConnectionTo
11/4 10:48:22.591 3500 Facility ???INFO: ICPPage::OnWizardBack: SetActivePage - eSynchronization
11/4 10:48:25.077 3500 Facility ???INFO: ICPPage::OnWizardBack: SetActivePage - eLocation
11/4 10:48:46.486 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eInputFile
11/4 10:48:48.741 3500 Facility ???INFO: ICPPage::OnWizardBack: SetActivePage - eLocation
11/4 10:48:50.654 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eSynchronization
11/4 10:49:04.168 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eAzureConnectionTo
11/4 10:49:08.838 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eLocationTo
11/4 10:49:16.022 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eVMSettingsAWS
11/4 10:49:18.104 125c Facility ???INFO: WrapperESXI::connect: m_url - https://mbvmware/sdk
11/4 10:49:22.557 125c Facility ???ERROR: WrapperESXI::connect: m_proxy->RetrieveServiceContent fail - 28
11/4 10:49:22.557 125c Facility ???ERROR: getErrorFromSOAP: soap_sprint_fault - SOAP 1.1 fault SOAP-ENV:Server [no subcode]
"No Data"
Detail: get host by name failed in tcp_connect()
11/4 10:49:22.557 125c Facility ???ERROR: VMConverter::ESXIConverter::Connection: connect fail - 28
11/4 10:49:24.444 125c Facility ???WARNING: CPPESXConnectionTo::onNext: connect No Data
11/4 10:49:27.471 3500 Facility ???INFO: ICPPage::OnWizardBack: SetActivePage - eLocationTo
11/4 10:49:30.030 3500 Facility ???INFO: ICPPage::OnWizardBack: SetActivePage - eAzureConnectionTo
11/4 10:49:32.983 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eLocationTo
11/4 10:49:35.823 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eFormat
11/4 10:49:41.791 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eOptionsVMware
11/4 10:49:57.192 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eConverting
11/4 10:54:56.297 3500 Facility ???INFO: ICPPage::OnWizardBack: SetActivePage - eOptionsVMware
11/4 10:54:57.592 3500 Facility ???INFO: ICPPage::OnWizardBack: SetActivePage - eFormat
11/4 10:55:08.584 3500 Facility ???INFO: ICPPage::OnWizardBack: SetActivePage - eLocationTo
11/4 10:55:19.818 3500 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eVMSettingsAWS
11/4 10:55:21.199 4210 Facility ???INFO: WrapperESXI::connect: m_url - https://mbvmware/sdk
11/4 10:55:26.061 4210 Facility ???ERROR: WrapperESXI::connect: m_proxy->RetrieveServiceContent fail - 28
11/4 10:55:26.061 4210 Facility ???ERROR: getErrorFromSOAP: soap_sprint_fault - SOAP 1.1 fault SOAP-ENV:Server [no subcode]
"No Data"
Detail: get host by name failed in tcp_connect()
11/4 10:55:26.061 4210 Facility ???ERROR: VMConverter::ESXIConverter::Connection: connect fail - 28
Top
yaroslav (staff)
Staff
Posts: 4309
Joined: Mon Nov 18, 2019 11:11 am

Wed Nov 05, 2025 10:14 pm

Could you please try an older build I shared above?
Top
yaroslav (staff)
Staff
Posts: 4309
Joined: Mon Nov 18, 2019 11:11 am

Thu Nov 13, 2025 12:53 pm

UPD: The dev team tried to reproduce the behavior. WIN11 conversion ran well to ESXI8. It looks like there's an issue with the networking.
Top
Post Reply

Return to “StarWind V2V Converter, P2V Migrator”