Convert RODC from Vmware to HyperV

[allarmiasl9]

Good evening, I'm trying to convert a Read Only Domain Controller from VMWare to HyperV, but when I boot the machine, I get a blue screen with error 0xc00002e2.
Is there anything I can do to try to resolve the problem?
Thanks

[yaroslav (staff)]

Does not look like a conversion issue. Check this out https://me.n-able.com/s/article/Resolvi ... %20demoted (https://learn.microsoft.com/en-us/troub ... 02e2-error).

[Nothome1976]

That error usually points to an Active Directory database issue. Since it’s a Read Only Domain Controller, the simplest fix is often to remove it from the environment and deploy a fresh RODC on Hyper-V. If you’d prefer to try repairing, you can boot into Directory Services Restore Mode and run ntdsutil for an integrity check, but a clean rebuild is generally faster and safer for RODCs.

[LuisRowe]

Does not look like a conversion issue. Check this out https://me.n-able.com/s/article/Resolvi ... %20demoted (https://learn.microsoft.com/en-us/troub ... 02e2-error.

Thanks for sharing

[yaroslav (staff)]

You are welcome