StarWind iSCSI SAN
StarWind Native SAN for Hyper-V
 

"One Of The Parameters Was Invalid"

VM image converter (VMDK, VHD, VHDX, IMG, RAW, QCOW and QCOW2)

Moderators: art (staff), anton (staff), Anatoly (staff), Max (staff)

"One Of The Parameters Was Invalid"

Postby steve.hulsberg » Fri Nov 16, 2018 4:24 pm

When starting the V2V converter from a remote ESXi 6.0 host to a HV host I get the above error for each of the datastores. It opens the image file, creates a VM in HV and it looks like it completes one VMDK conversion and then fails. Is there a size limit on the VMDK that the V2V Converter can handle? These VMDKs are over 2TB.


Steve
steve.hulsberg
 
Posts: 33
Joined: Fri Nov 09, 2018 5:02 pm

Re: "One Of The Parameters Was Invalid"

Postby Oleg(staff) » Mon Nov 19, 2018 11:41 am

There are no size limitations for StarWind V2V converter.
Oleg(staff)
Staff
 
Posts: 567
Joined: Fri Nov 24, 2017 7:52 am

Re: "One Of The Parameters Was Invalid"

Postby steve.hulsberg » Mon Nov 19, 2018 5:17 pm

Oleg(staff) wrote:There are no size limitations for StarWind V2V converter.


Great, but what about the rest of my question. What would cause this error? Where are the logs?
steve.hulsberg
 
Posts: 33
Joined: Fri Nov 09, 2018 5:02 pm

Re: "One Of The Parameters Was Invalid"

Postby Oleg(staff) » Tue Nov 20, 2018 1:23 pm

Could you please send a screenshot of this error?
Oleg(staff)
Staff
 
Posts: 567
Joined: Fri Nov 24, 2017 7:52 am

Re: "One Of The Parameters Was Invalid"

Postby steve.hulsberg » Tue Nov 20, 2018 5:11 pm

Oleg(staff) wrote:Could you please send a screenshot of this error?


It looks like it creates the folders, starts creating the files in HV but when it gets to the large VMDKs it fails.

Starwind1.JPG
Starwind1.JPG (20.92 KiB) Viewed 4500 times

Starwind2.JPG
Starwind2.JPG (33.29 KiB) Viewed 4500 times
steve.hulsberg
 
Posts: 33
Joined: Fri Nov 09, 2018 5:02 pm

Re: "One Of The Parameters Was Invalid"

Postby steve.hulsberg » Wed Nov 21, 2018 4:09 am

I tried with another VM and I see the same message. I am trying find what is common between them. Any ideas? Logs?
steve.hulsberg
 
Posts: 33
Joined: Fri Nov 09, 2018 5:02 pm

Re: "One Of The Parameters Was Invalid"

Postby Oleg(staff) » Wed Nov 21, 2018 10:04 am

I have passed this information to our R&D team in order to find the reason of this issue.
Oleg(staff)
Staff
 
Posts: 567
Joined: Fri Nov 24, 2017 7:52 am

Re: "One Of The Parameters Was Invalid"

Postby steve.hulsberg » Wed Nov 21, 2018 2:21 pm

Oleg(staff) wrote:I have passed this information to our R&D team in order to find the reason of this issue.


Do you know if logs are stored anywhere that I could look at? I am sure there is something that is logged that says which parameter is invalid. If I knew the location it could be an easy fix.
steve.hulsberg
 
Posts: 33
Joined: Fri Nov 09, 2018 5:02 pm

Re: "One Of The Parameters Was Invalid"

Postby Oleg(staff) » Wed Nov 21, 2018 5:19 pm

I have passed the request about logs for the V2V converter to our R&D team as well.
Oleg(staff)
Staff
 
Posts: 567
Joined: Fri Nov 24, 2017 7:52 am

Re: "One Of The Parameters Was Invalid"

Postby steve.hulsberg » Wed Nov 21, 2018 8:08 pm

Oleg(staff) wrote:I have passed the request about logs for the V2V converter to our R&D team as well.


It seems like we have a lot of pending issues. I understand this is a "free" product but it is an important piece for the evaluation of your VSAN software. When do you expect to hear back so we can resolve these pending issues?

Thank you,
Steve
steve.hulsberg
 
Posts: 33
Joined: Fri Nov 09, 2018 5:02 pm

Re: "One Of The Parameters Was Invalid"

Postby Oleg(staff) » Thu Nov 22, 2018 11:42 am

Steve,
There were a lot of functionality and improvements added to this V2V version. The issues you have should be repaired in the next V2V converter build.
Oleg(staff)
Staff
 
Posts: 567
Joined: Fri Nov 24, 2017 7:52 am

Re: "One Of The Parameters Was Invalid"

Postby steve.hulsberg » Sun Nov 25, 2018 2:04 am

Oleg(staff) wrote:Steve,
There were a lot of functionality and improvements added to this V2V version. The issues you have should be repaired in the next V2V converter build.


When will this version come out? How do we know which version we are running?
steve.hulsberg
 
Posts: 33
Joined: Fri Nov 09, 2018 5:02 pm

Re: "One Of The Parameters Was Invalid"

Postby Oleg(staff) » Mon Nov 26, 2018 11:20 am

At the current moment, the version is 9.0.0.75.
You can check the version you are running in the properties of V2V_Converter.exe: C:\Program Files\StarWind Software\StarWind V2V Image Converter
The new version should be released in the nearest time. We will keep the community updated.
Oleg(staff)
Staff
 
Posts: 567
Joined: Fri Nov 24, 2017 7:52 am

Re: "One Of The Parameters Was Invalid"

Postby steve.hulsberg » Tue Nov 27, 2018 7:01 pm

Oleg(staff) wrote:At the current moment, the version is 9.0.0.75.
You can check the version you are running in the properties of V2V_Converter.exe: C:\Program Files\StarWind Software\StarWind V2V Image Converter
The new version should be released in the nearest time. We will keep the community updated.


Hopefully soon. This is becoming increasingly frustrating. Can you at least provide me the location of the logs so I can do some researching of the issue? I had requested the log location a while back but have not heard back.

Thank you,
Steve
steve.hulsberg
 
Posts: 33
Joined: Fri Nov 09, 2018 5:02 pm

Re: "One Of The Parameters Was Invalid"

Postby Oleg(staff) » Thu Nov 29, 2018 12:07 pm

Hi Steve,
Sorry, but logs will be included to the new build.
Oleg(staff)
Staff
 
Posts: 567
Joined: Fri Nov 24, 2017 7:52 am

Next

Return to StarWind V2V Converter

Who is online

Users browsing this forum: No registered users and 0 guests