Error in Server log

Software-based VM-centric and flash-friendly VM storage + free version

Moderators: anton (staff), art (staff), Anatoly (staff), Max (staff)

Post Reply
ShayneA
Posts: 4
Joined: Mon Sep 18, 2017 9:42 pm

Mon Sep 18, 2017 9:44 pm

Hi, I am using the trial. On one of the nodes I am getting the following error which repeats every minute.

9/18 14:33:21.405 15bc HA: CHADevice::SendWUSControlRequest: Global callback SW_WU_SERV_CONTROL (ENABLE) failed, with error code 0x139f!
9/18 14:33:21.405 1628 Srv: CWUServiceControl::EnableService: Service wasn't disabled.

I can't find any information on this error. How can I correct the issue?

Thanks.
Top
Boris (staff)
Staff
Posts: 805
Joined: Fri Jul 28, 2017 8:18 am

Wed Sep 20, 2017 2:13 pm

ShayneA,
This is a debug message that is not actually anything you need to worry about. It does not indicate any misbehavior of StarWind VSAN. Just ignore these messages, they will be removed in future builds.
Top
ShayneA
Posts: 4
Joined: Mon Sep 18, 2017 9:42 pm

Wed Sep 20, 2017 4:59 pm

Thank you.
Top
Sergey (staff)
Staff
Posts: 86
Joined: Mon Jul 17, 2017 4:12 pm

Thu Sep 21, 2017 10:58 am

You're welcome. Let us know if you need any further assistance.
Top
Post Reply

Return to “StarWind Virtual SAN (VSAN) [+Free], HCI Appliance (HCA), Virtual HCI Appliance (VHCA) [+Free], StarWind x Proxmox VE SAN Integration Services”