StarWind iSCSI SAN
StarWind Native SAN for Hyper-V
 

Conecting to a starwind target from unh in linux

Pure software-based VM-centric and flash-friendly VM storage (iSCSI, SMB3, NFS, iSER and NVMe over Fabrics) including free version. Same software embedded on StarWind ready nodes.

Moderators: art (staff), anton (staff), Anatoly (staff), Max (staff)

Conecting to a starwind target from unh in linux

Postby Guest » Thu Jul 22, 2004 4:39 pm

Hello, I'm trying to connect to a starwind target from unh in linux, and I get a failed login. I'm not using CHAP and I set it with the following command shell script:

IP=192.168.1.1
TARGET=iqn.2003-06.com.rocketdivision.starwind:maino.cddvd.d
./iscsi_manage init restore host=1
./iscsi_manage init set InitiatorName=`uname -n` host=1
./iscsi_manage init set TargetName=$TARGET host=1
./iscsi_manage init set SessionType=Normal host=1
./iscsi_config up ip=$IP port=3260 host=1 lun=1

any idea?
Guest
 

Re: Conecting to a starwind target from unh in linux

Postby Alex (staff) » Fri Jul 23, 2004 12:12 pm

Hello,

Anonymous wrote:./iscsi_config up ip=$IP port=3260 host=1 lun=1


Change this line to:

./iscsi_config up ip=$IP port=3260 host=1 lun=0

Also I passed "host=" and "target=" parameters to each "iscsi_manage init" call. But I do not known if it is required indeed.
Best regards,
Alexey.
User avatar
Alex (staff)
Staff
 
Posts: 177
Joined: Sat Jun 26, 2004 8:49 am


Return to StarWind Virtual SAN / StarWind Virtual SAN Free / StarWind HyperConverged Appliance / StarWind Storage Appliance

Who is online

Users browsing this forum: No registered users and 4 guests