Starwind VSAN Free - each VSAN sees only itself in GUI - 3 host HA cluster
Posted: Fri Sep 04, 2026 10:25 am
Hi,
I have small Proxmox PVE 9 cluster, and each server has Starwind VSAN 1.6.580.7361.
The problem is, that GUI of each VSAN server show LUN - HA state:online, but when I get into the Lun -> HA it shows HA status Disabled (2 replication partners are not synchronized), and under replication partners only the actual vSAN that I'm logged on shows the Online and Synchronized status, the res one are "offline" and sync status is "unknown".
Network wise - everything is OK, because all appliances see their nic's up and running. I can ping all the hosts both from proxmox and each vSAN VM. And each PVE host see all the iscsi sessions from all vSANs
I don't see any task errors / error logs on each starwind vsan appliance (in gui). Any clue what went wrong here?
I have small Proxmox PVE 9 cluster, and each server has Starwind VSAN 1.6.580.7361.
The problem is, that GUI of each VSAN server show LUN - HA state:online, but when I get into the Lun -> HA it shows HA status Disabled (2 replication partners are not synchronized), and under replication partners only the actual vSAN that I'm logged on shows the Online and Synchronized status, the res one are "offline" and sync status is "unknown".
Network wise - everything is OK, because all appliances see their nic's up and running. I can ping all the hosts both from proxmox and each vSAN VM. And each PVE host see all the iscsi sessions from all vSANs
Code: Select all
iscsiadm -m session
tcp: [1] 172.20.5.103:3260,1 iqn.2008-08.com.starwindsoftware:172.20.5.103-vsan-iscsi (non-flash)
tcp: [2] 172.20.5.102:3260,1 iqn.2008-08.com.starwindsoftware:172.20.5.102-vsan-iscsi (non-flash)
tcp: [3] 172.20.5.101:3260,1 iqn.2008-08.com.starwindsoftware:172.20.5.101-vsan-iscsi (non-flash)