The Latest Gartner® Magic Quadrant™Hyperconverged Infrastructure Software
The Latest Gartner® Magic Quadrant™Hyperconverged Infrastructure Software
IQN Name Change
Moderators: anton (staff), art (staff), Anatoly (staff), Max (staff)
-
Michael (staff)
- Staff
- Posts: 319
- Joined: Thu Jul 21, 2016 10:16 am
Hello jhonken,
It is impossible to change the target IQN Name once it was created.
Alternatively, you can follow the steps below:
-turn off Production on existing target and disconnect it from iSCSI Initiator;
-remove device under existing target;
-add device back as Existing Virtual Disk and Choose the Targert Attachment Method as Unassigned. Use Add Device (advanced) wizard to complete it. It will be added without target;
-add the new target with the correct name;
-right click on the newly created target and Add existing Device to Target from appeared list;
-connect new target in iSCSI initiator and turn on Production.
It is impossible to change the target IQN Name once it was created.
Alternatively, you can follow the steps below:
-turn off Production on existing target and disconnect it from iSCSI Initiator;
-remove device under existing target;
-add device back as Existing Virtual Disk and Choose the Targert Attachment Method as Unassigned. Use Add Device (advanced) wizard to complete it. It will be added without target;
-add the new target with the correct name;
-right click on the newly created target and Add existing Device to Target from appeared list;
-connect new target in iSCSI initiator and turn on Production.