Spurious 'storage pool is not configured' messages?

Software-based VM-centric and flash-friendly VM storage + free version

Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)

Post Reply
danswartz
Posts: 71
Joined: Fri May 03, 2019 7:21 pm

Sat May 11, 2019 8:16 pm

So the HA cluster I have mentioned before. It's working fine. The only oddity is that whenever I connect node 1 (if it was disconnected in my GUI), I get the message 'Storage pool is not configured!' with the expected Yes, Choose path and Disconnect buttons. But if I hit the close button on the dialog box, everything seems to be just fine. It happens consistently with node 1, never with node 2.
Boris (staff)
Staff
Posts: 805
Joined: Fri Jul 28, 2017 8:18 am

Sun May 12, 2019 4:47 am

Try setting the path. That will help you eliminating further messages of that kind.
danswartz
Posts: 71
Joined: Fri May 03, 2019 7:21 pm

Sun May 12, 2019 2:23 pm

That was it, many thanks! Somehow on node 1, I had set the wrong default path. It didn't hurt anything, because the HA LUN was configured properly!
Boris (staff)
Staff
Posts: 805
Joined: Fri Jul 28, 2017 8:18 am

Sun May 12, 2019 4:39 pm

Thanks for confirming this worked for you.
Post Reply