I have had an existing startwind deployment for the past 11 months, and it's been great, now for some reason i'm unable to add any new devices to synchronization, but existing devices continue to sync with no issues.
Adding first device works with no issue, But when I go to the synchronization manager to add the other server, it runs through, and says that all the interfaces are down, and the syncrhronization never starts. It does the same thing no matter what storage i put the device on. In the logs I see authentication failures, but i'm not using any authentication settings, and I see stuff like this in log:
7 16:34:46.438 1368 HA: *** CHAPartnerISCSIChannelManager::SendCustomControlScsiCommand: Valid channel not found!
9/17 16:34:46.438 1368 HA: *** CHAPartnerNode::SendPartnerNodeVersionRequestCommand: EXITing with failure, SendCustomControlScsiCommand(HA_CHANNEL_TYPE_HEARTBEAT) failed, error code 1168, scsi status = 0!
9/17 16:34:46.438 1368 HA: *** CHAPartnerNode::SendGetPartnerNodeInfoCommandV6: EXITing with failure, partner node version update failed!
9/17 16:34:46.454 1368 HA: *** CHAPartnerISCSIChannelManager::SendCustomControlScsiCommand: Valid channel not found!
9/17 16:34:46.454 1368 HA: *** CHAPartnerNode::SendPartnerNodeVersionRequestCommand: SendCustomControlScsiCommand(HA_CHANNEL_TYPE_SYNC) failed, error code 1168, scsi status = 0!
9/17 16:34:46.454 1368 HA: CHAPartnerNode::SendPartnerNodeVersionRequestCommand: Try to get partner node version through heartbeat channel.
9/17 16:34:46.454 1368 HA: *** CHAPartnerISCSIChannelManager::SendCustomControlScsiCommand: Valid channel not found!
9/17 16:34:46.454 1368 HA: *** CHAPartnerNode::SendPartnerNodeVersionRequestCommand: EXITing with failure, SendCustomControlScsiCommand(HA_CHANNEL_TYPE_HEARTBEAT) failed, error code 1168, scsi status = 0!
9/17 16:34:46.454 1368 HA: *** CHAPartnerNode::SendPartnerNetControlInterfacesRequestCommand: EXITing with failure, partner node version 0x0 is not supported or invalid. Nothing will be sent!
9/17 16:34:46.454 1368 HA: *** CHAPartnerNode::GetNetControlInterfacesList: EXITing with failure, SendPartnerNetInterfacesRequestCommand() failed, error code!
9/17 16:34:46.454 1368 HA: *** CHAPartnerISCSIChannelManager::SendCustomControlScsiCommand: Valid channel not found!
9/17 16:34:46.454 1368 HA: *** CHAPartnerNode::SendPartnerNodeVersionRequestCommand: SendCustomControlScsiCommand(HA_CHANNEL_TYPE_SYNC) failed, error code 1168, scsi status = 0!
9/17 16:34:46.454 1368 HA: CHAPartnerNode::SendPartnerNodeVersionRequestCommand: Try to get partner node version through heartbeat channel.
9/17 16:34:46.454 1368 HA: *** CHAPartnerISCSIChannelManager::SendCustomControlScsiCommand: Valid channel not found!
9/17 16:34:46.454 1368 HA: *** CHAPartnerNode::SendPartnerNodeVersionRequestCommand: EXITing with failure, SendCustomControlScsiCommand(HA_CHANNEL_TYPE_HEARTBEAT) failed, error code 1168, scsi status = 0!
9/17 16:34:46.454 1368 HA: *** CHAPartnerNode::SendGetPartnerNodeInfoCommandV6: EXITing with failure, partner node version update failed!
9/17 16:34:46.454 1368 HA: *** CHAPartnerISCSIChannelManager::SendCustomControlScsiCommand: Valid channel not found!
9/17 16:34:46.454 1368 HA: *** CHAPartnerNode::SendPartnerNodeVersionRequestCommand: SendCustomControlScsiCommand(HA_CHANNEL_TYPE_SYNC) failed, error code 1168, scsi status = 0!
9/17 16:34:46.454 1368 HA: CH
I've tried updating software, and removing and reloading software and I always get same errors and results.
The Latest Gartner® Magic Quadrant™Hyperconverged Infrastructure Software