Page 1 of 1
cannot complete format
Posted: Mon Feb 05, 2007 3:34 pm
by aero
I'm evaluating the trial version of StarWind downloaded three days ago and Microsoft ISCSI initiator 2.03 on Windows 2003 Enterprise.
I have successfully configured the StartWind target and have connected to it.
I can see device in device manager and volume in disk management.
But every format request hungs up and shows timeout message.
After that error every subsequent format attempt shows "previous operation did not complete" message.
What can be source of that problem?
Re: cannot complete format
Posted: Mon Feb 05, 2007 10:27 pm
by anton (staff)
1) What's the speed of your connection? Gb or 100 Mb?
2) Do you use pre-alllocated volume or sparse image file (unallocated until first write)?
aero wrote:I'm evaluating the trial version of StarWind downloaded three days ago and Microsoft ISCSI initiator 2.03 on Windows 2003 Enterprise.
I have successfully configured the StartWind target and have connected to it.
I can see device in device manager and volume in disk management.
But every format request hungs up and shows timeout message.
After that error every subsequent format attempt shows "previous operation did not complete" message.
What can be source of that problem?
Posted: Tue Feb 06, 2007 10:07 am
by aero
1. i'm using 1 Gb connection
2. flat image file
Device: ImageFile0
Image file name: D:\image.img
Size: 3000 MB
Asynchronous: Yes
Readonly: No
Clustered: Yes
Posted: Tue Feb 06, 2007 10:54 am
by anton (staff)
Please send us StarWind log file to
support@rocketdivison.com. Thank you!
aero wrote:1. i'm using 1 Gb connection
2. flat image file
Device: ImageFile0
Image file name: D:\image.img
Size: 3000 MB
Asynchronous: Yes
Readonly: No
Clustered: Yes
Posted: Wed Feb 07, 2007 10:13 am
by aero
Please forget about that request. I have found solution.
Seems it was incompatibility of Microsoft ISCSI initiator and
Adaptec Storage Manager's VDS provider installed by hosting provider.
Posted: Wed Feb 07, 2007 10:37 am
by anton (staff)
Excellent! At least we know it could such an issue
Thanks!
aero wrote:Please forget about that request. I have found solution.
Seems it was incompatibility of Microsoft ISCSI initiator and
Adaptec Storage Manager's VDS provider installed by hosting provider.