Synchronizing stucks at 0%

[massimo.favretto]

VSA-01.zip

File for VSA-01

(9 KiB) Downloaded 189 times

[massimo.favretto]

VSA-02.zip

File for VSA-02

(8.99 KiB) Downloaded 179 times

VSA-02.zip

File for VSA-02

(8.99 KiB) Downloaded 179 times

[yaroslav (staff)]

I noticed that you did not use the script I shared. The script I mentioned earlier has 3 interfaces: 2 heartbeat (iSCSI and Management)+Sync.
Your files have only one heartbeat link. Please consider redoing the HA devices the way described here https://forums.starwindsoftware.com/vie ... p+3#p31505.
Also, please be aware of the StarWind VSAN system requirements https://www.starwindsoftware.com/system-requirements.
How to replace the .cfgs. Stop StarWindService on both sides -> Copy the existing config files -> delete them in /StarWind -> Bring the new config files (rename them removing the indexes) -> Start the service on both nodes.

[massimo.favretto]

VSA_Error.PNG (22.8 KiB) Viewed 4695 times

After applying the cfg files I obtain this error:

[massimo.favretto]

If I try to manually sync device with the SyncHaDevice.ps1 script I obtain this error:

Sync_error.PNG (7.68 KiB) Viewed 4693 times

[yaroslav (staff)]

Hi, log the case with us by sending an email to support@starwind.com. Use this thread and 521132 as the reference.

[massimo.favretto]

Modifying my script, and simply adding the IP of management as you suggest I got it functioning.

$syncInterface="#p2=192.168.1.21:3260" -f $addr2,
$hbInterface="#p2=192.168.2.21:3260", 192.168.0.41:3260" -f $addr2,

$syncInterface2="#p1=192.168.1.11:3260" -f $addr,
$hbInterface2="#p1=192.168.2.11:3260", 192.168.0.31:3260" -f $addr,

[massimo.favretto]

I would to thank you for the time spent in resolve my problem

[yaroslav (staff)]

Glad to know that it finally works
Do not hesitate to contact me if assistance is required.

[ballzop]

Were you able to connect the targets to ESXi? tomzpot mdro.fun/mobdro/

[yaroslav (staff)]

The targets should be available once you rescan the storage and adapter.