Adding LUNS to existing HA target via CLI

Software-based VM-centric and flash-friendly VM storage + free version

Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)

Post Reply
dbyte
Posts: 2
Joined: Thu Jan 07, 2021 3:09 pm

Thu Jan 07, 2021 4:29 pm

I'm really struggling a bit with the powershell scripts and managing to setup the environment for a 2-node HA with multiple luns. I can get a single HA target with one lun done fine. I can get multiple HA targets with 1 lun each fine, but what I cannot seem to figure out is how to add multiple luns to a single HA target using the CLI.. When I try it, I go into some kind of synchronization hell and have this error in the powershell console:
-
control 0x00000167A7F982C0 -InitSynchronize:"" -SynchronizationType:"3"
-
200 Failed: Operation cannot be completed. Can't send command to the partner node..

Does anyone have a guide on adding a second HA lun to an existing target?
yaroslav (staff)
Staff
Posts: 2277
Joined: Mon Nov 18, 2019 11:11 am

Fri Jan 08, 2021 7:00 pm

Greetings,

Welcome to StarWind Forum. We do not recommend adding a second HA device to a target. That is why this seems to be hard to do via PowerShell.
dbyte
Posts: 2
Joined: Thu Jan 07, 2021 3:09 pm

Fri Jan 08, 2021 8:26 pm

Thank you for that information! I thought I was losing my mind, :)
yaroslav (staff)
Staff
Posts: 2277
Joined: Mon Nov 18, 2019 11:11 am

Sat Jan 09, 2021 4:08 am

No worries, always here to help.
Post Reply