Recovery from a physical disk failure

Software-based VM-centric and flash-friendly VM storage + free version

Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)

Post Reply
b4btec
Posts: 2
Joined: Tue Dec 18, 2018 3:54 am

Sat Jun 22, 2019 10:08 pm

I run a Starwind hyperconverged appliance at my business and I am using an NFR license to run my homelab to learn and get accustomed to it. I set up my homelab cluster following Starwind's document for Hyper-V, and I had three physical disks in each of the two nodes. The, the C drive, a D drive had the CSV1 and witness virtual disks and an E drive that had the CSV2 virtual disk. In node 2 the physical D drive failed, losing the witness and CSV1 on that node. I'm struggling to find documentation on how to recreate the disks on node 2 and get them synchronized. What is the procedure for this situation?
Boris (staff)
Staff
Posts: 805
Joined: Fri Jul 28, 2017 8:18 am

Mon Jun 24, 2019 9:44 am

Start from step 28 - and you will be able to create a replica of your disk to the previously failed partner.
https://www.starwindsoftware.com/resour ... -ha-device
Post Reply