vSan Power Outage Issue
Posted: Thu Sep 20, 2018 8:05 am
Hi all,
I've been using StarWind vSan free edition for a short while, but seem to have hit an issue. Our UPS had a hiccup and cut power to the two servers connected to it. Those two servers each run a copy of vSan, sharing a 5tb HA image. After powering them back up, I found that the iSCSI connections no longer establish for the 5tb VM (only the small 5GB witness volumes). I ran the powershell scripts to assess the status, and it appears that the 5tb volume isn't synced - so I ran the SyncHADevice script.
It's now repeatedly printing "Synchronizing: 0%" and has done so for the last 40 or so minutes, and I still can't establish iSCSI connections. Is this normal?
Thanks!
I've been using StarWind vSan free edition for a short while, but seem to have hit an issue. Our UPS had a hiccup and cut power to the two servers connected to it. Those two servers each run a copy of vSan, sharing a 5tb HA image. After powering them back up, I found that the iSCSI connections no longer establish for the 5tb VM (only the small 5GB witness volumes). I ran the powershell scripts to assess the status, and it appears that the 5tb volume isn't synced - so I ran the SyncHADevice script.
It's now repeatedly printing "Synchronizing: 0%" and has done so for the last 40 or so minutes, and I still can't establish iSCSI connections. Is this normal?
Thanks!