Starwind VSAN Free IP Nic binding. (MotherBoard Replacement)
Posted: Mon Jul 23, 2018 11:10 pm
First off LOVE starwind, but im noob without the GUI.
Our Server has a bad temp sensor on it. we have to replace the mother board.
Our setup is a Single Starwind Free node.
How does Starwind use the NIC's because I know the MAC addresses will change on the boards Obviously. But when windows boots up will Starwinds just use what ever Nic was configured for or does it do it based off Mac address?
So if NIC 1 Management <-- Windows OS
NIC 2 ISCSI1 192.168.81.111
NIC 3 ISCSI 192.168.82.111
When the new board gets installed will have to re-ip or rebind anything. or most i have to worry about is the nic order in windows changes and i gotta move some cables around.
Thanks!
Our Server has a bad temp sensor on it. we have to replace the mother board.
Our setup is a Single Starwind Free node.
How does Starwind use the NIC's because I know the MAC addresses will change on the boards Obviously. But when windows boots up will Starwinds just use what ever Nic was configured for or does it do it based off Mac address?
So if NIC 1 Management <-- Windows OS
NIC 2 ISCSI1 192.168.81.111
NIC 3 ISCSI 192.168.82.111
When the new board gets installed will have to re-ip or rebind anything. or most i have to worry about is the nic order in windows changes and i gotta move some cables around.
Thanks!