Page 1 of 1
Storage pool empty
Posted: Fri Aug 11, 2017 6:30 am
by ken1
Hi,
Just installed the StarWind VSA, but I can't see my disks??
//Kenneth
Re: Storage pool empty
Posted: Fri Aug 11, 2017 10:11 am
by Sergey (staff)
Hello, ken1! I hope this should help (StarWind VSA Installation Guide with Hyper-V). Check step 17 and down below.
https://www.starwindsoftware.com/techni ... yper-V.pdf
Please follow the link below if you are using VMware vSphere environment (steps 13-22)
https://www.starwindsoftware.com/techni ... sphere.pdf
Let me know if any further assistance required.
Re: Storage pool empty
Posted: Fri Aug 11, 2017 10:14 am
by ken1
I have done it before on a Windows OS, no problem there, but now in the VSA, i can't see the disks... see this image..
http://imgur.com/a/3KKPu
Re: Storage pool empty
Posted: Fri Aug 11, 2017 11:09 am
by ken1
If i install a Windows vm on the same ESXi host, I can see the disks (datastore)
Re: Storage pool empty
Posted: Fri Aug 11, 2017 2:54 pm
by Sergey (staff)
When you see a dialog window with "Storage pool is not configured" message, please close it (press X on top-right of the window). After you connect to the server, go to Configuration >> VSA Storage. Proceed with configuration starting from step 22 of this guide:
https://www.starwindsoftware.com/techni ... yper-V.pdf
I hope this helps.
Re: Storage pool empty
Posted: Mon Aug 14, 2017 11:55 am
by ken1
Sergey (staff) wrote:When you see a dialog window with "Storage pool is not configured" message, please close it (press X on top-right of the window). After you connect to the server, go to Configuration >> VSA Storage. Proceed with configuration starting from step 22 of this guide:
https://www.starwindsoftware.com/techni ... yper-V.pdf
I hope this helps.
Thanks! it did
Re: Storage pool empty
Posted: Mon Aug 14, 2017 12:49 pm
by Sergey (staff)
Great! I am happy to hear that
