Storage pool empty

[ken1]

Hi,

Just installed the StarWind VSA, but I can't see my disks??

//Kenneth

[Sergey (staff)]

Hello, ken1! I hope this should help (StarWind VSA Installation Guide with Hyper-V). Check step 17 and down below.
https://www.starwindsoftware.com/techni ... yper-V.pdf

Please follow the link below if you are using VMware vSphere environment (steps 13-22)
https://www.starwindsoftware.com/techni ... sphere.pdf

Let me know if any further assistance required.

[ken1]

I have done it before on a Windows OS, no problem there, but now in the VSA, i can't see the disks... see this image..

http://imgur.com/a/3KKPu

[ken1]

If i install a Windows vm on the same ESXi host, I can see the disks (datastore)

[Sergey (staff)]

When you see a dialog window with "Storage pool is not configured" message, please close it (press X on top-right of the window). After you connect to the server, go to Configuration >> VSA Storage. Proceed with configuration starting from step 22 of this guide:
https://www.starwindsoftware.com/techni ... yper-V.pdf
I hope this helps.

[ken1]

When you see a dialog window with "Storage pool is not configured" message, please close it (press X on top-right of the window). After you connect to the server, go to Configuration >> VSA Storage. Proceed with configuration starting from step 22 of this guide:
https://www.starwindsoftware.com/techni ... yper-V.pdf
I hope this helps.

Thanks! it did

[Sergey (staff)]

Great! I am happy to hear that