Page 1 of 1
how i can do for reset the changes?
Posted: Fri Jul 15, 2005 5:53 am
by toneal
server: starwind
client:Ms iscsi
i can easily to connect the server firstly,but when i reboot my computer i found that all of the changes when last connect.
for example i am creating a dictionary such as "test",then i reboot my pc, i can find the same dic~ "test" in the virtual partirion.
i want the client can restore all changes when i renconnect the server.what must i to to? sorry my english is so bad~
Posted: Fri Jul 15, 2005 11:10 am
by Val (staff)
Hi toneal,
If I got it correct you need an iSCSI target that is able to perform auto reset to the previous state on a client reconnect?
The recent StarWind package does not contain such a feature.
But we've implemented an additional plug-in for the service (called IBVolume), that allows to do what you asked.
The plug-in is being tested in our test labs.
We're not sure now will it be a part of the next StarWind release or will be an optional add-on distributed separately.
If you need the the auto-reset feature please contact our management on mailto:
support@starwind.com
thx a lot
Posted: Sun Jul 17, 2005 1:16 am
by toneal
thank you i will wait for the new ver
Re: thx a lot
Posted: Sun Jul 17, 2005 8:53 am
by anton (staff)
It would take some time until we'll complete the full-cycle tests... Do you want to have preview version?
toneal wrote:thank you i will wait for the new ver
Re: thx a lot
Posted: Thu Jul 28, 2005 4:47 pm
by Val (staff)
toneal wrote:thank you i will wait for the new ver
Hi,
I've sent a link to the recent preview version to your email.
Posted: Mon Feb 20, 2006 6:32 pm
by datongnet
i have the same problem
then i set the --readonly=yes i can't play games in the virtual disk it clued on "medium is protected " because it will create same temp files them play games
then i set readonly=no all of the changes will be saved and i can't open the disk on server
does the "ibv" only support for "img" ? does it support harddisk ?
how to converting ibv to ImageFile ?
Posted: Mon Feb 20, 2006 9:25 pm
by Val (staff)
Hi,
1) As a work around you could try to move temporary files to a different drive.
2) The IBVolume plug-in will be released in next 2 weeks as a part of new StarWind 3.0. The version will support convertion IBVolumes to ImageFiles and vice versa.
thank you very much
Posted: Tue Feb 21, 2006 6:07 am
by datongnet
thankyou
1) not just temp file , same games often update
2) i wish ibv support harddisk too
in china ,there are same iscsi software .every client has a workdirectory,then client reboot ,the workdirectory will be cleared.
the server can designate a "super user" .
"super user" can update the date in the client which was designated
administrator also can update in server directly ,no need to stop the iscsi service.
Re: thank you very much
Posted: Tue Feb 21, 2006 7:41 am
by Val (staff)
Hi,
I see your point.
The recent IBVolume should be able to work as you need in one of its modes.
Thank you for the link, we'll look at the software.
Posted: Sat Feb 25, 2006 2:34 pm
by Yves Smolders
Valery,
Does this mean, if 5 clients connect, they can all have their own reads/writes to a shared image without actually changing the master image, just like other guys do?
Posted: Sat Feb 25, 2006 3:06 pm
by Val (staff)
Yves,
Yes, the new IBVolume plug-in supports sharing the same readonly master volume between several clients. Just create a cloned volume for each client and mount it...