Page 1 of 1

Is this a supported configuration

Posted: Mon Aug 18, 2008 1:55 pm
by lipoufski
I plan on setting up an HP DL320s server with 3TB of local storage. I will be doing boot to SAN using Qlogic adapters. I have tested this and it seems to work quite well.
I was planning on purchasing an Overland REO 4000 Disk Unit that is ISCSI based, and would like to mirror all my local disk to this unit. So can I just mount it using ISCSI and store my mirrors there, and if need be can I create ISCSI targets on an ISCSI disk?


Thanks

Re: Is this a supported configuration

Posted: Mon Aug 18, 2008 5:07 pm
by aaron (staff)
You need to wait for StarPort with iSCSI mirroring feature to do this. It will allow to RAID1 your local image (partition) and remote iSCSI target controlled one.
lipoufski wrote:I plan on setting up an HP DL320s server with 3TB of local storage. I will be doing boot to SAN using Qlogic adapters. I have tested this and it seems to work quite well.
I was planning on purchasing an Overland REO 4000 Disk Unit that is ISCSI based, and would like to mirror all my local disk to this unit. So can I just mount it using ISCSI and store my mirrors there, and if need be can I create ISCSI targets on an ISCSI disk?


Thanks