Software-based VM-centric and flash-friendly VM storage + free version
Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)
-
masde
- Posts: 1
- Joined: Fri Dec 14, 2007 10:43 am
Fri Dec 14, 2007 11:15 am
Hi,
i can't add new devices! In my log i can see the error messages:
12/14 10:59:47.243 1034 SPTI: '\\.\PhysicalDrive0': The adapter supports maximum transfer length 61440 bytes less than minimal allowed (MinBufSize = 65536 bytes)!
12/14 10:59:47.243 1034 SPTI: '\\.\PhysicalDrive1': The adapter supports maximum transfer length 61440 bytes less than minimal allowed (MinBufSize = 65536 bytes)!
12/14 10:59:47.243 1034 SPTI: '\\.\Tape0': The adapter supports maximum transfer length 61440 bytes less than minimal allowed (MinBufSize = 65536 bytes)!
The devices in RAID5 is connected to a SCSI controller Serveraid6i on IBM X226
Thanks
-
anton (staff)
- Site Admin
- Posts: 4010
- Joined: Fri Jun 18, 2004 12:03 am
- Location: British Virgin Islands
-
Contact:
Fri Dec 14, 2007 11:37 am
1) DO NOT SHARE HARD DISKS IN SPTI MODE.
2) Check your adapter drivers and increase buffer size. At least to the 256KB. <64KB transfer size is performance killer.
masde wrote:Hi,
i can't add new devices! In my log i can see the error messages:
12/14 10:59:47.243 1034 SPTI: '\\.\PhysicalDrive0': The adapter supports maximum transfer length 61440 bytes less than minimal allowed (MinBufSize = 65536 bytes)!
12/14 10:59:47.243 1034 SPTI: '\\.\PhysicalDrive1': The adapter supports maximum transfer length 61440 bytes less than minimal allowed (MinBufSize = 65536 bytes)!
12/14 10:59:47.243 1034 SPTI: '\\.\Tape0': The adapter supports maximum transfer length 61440 bytes less than minimal allowed (MinBufSize = 65536 bytes)!
The devices in RAID5 is connected to a SCSI controller Serveraid6i on IBM X226
Thanks
Regards,
Anton Kolomyeytsev
Chief Technology Officer & Chief Architect, StarWind Software
