How to rebuild 2node HA Hyper-v

Software-based VM-centric and flash-friendly VM storage + free version

Moderators: anton (staff), art (staff), Anatoly (staff), Max (staff)

Post Reply
ivan
Posts: 1
Joined: Thu Jan 21, 2016 10:37 pm

Thu Jan 21, 2016 10:44 pm

Hello.

I have(had :( ) HA 2 node hyper-v cluster based on starwind.

The problem is that one of the servers was stollen. Also I have no backups of lost server

Is there any manual or "how to" which could be usefull for me in this case. I have another one server of same config and i want to install it to work in pair with the rest server.

Sorry for my english. :)

Thank you!
Top
User avatar
darklight
Posts: 185
Joined: Tue Jun 02, 2015 2:04 pm

Thu Jan 21, 2016 11:31 pm

It's quite simple.
Preconfigure your new server like you would usually do (Windows, storage, networks, iscsi, multipathing and so on), then install starwind on it. Since your second server is still ok you can recreate your replication from it and get everything up and running. You may use this guide https://www.starwindsoftware.com/starwi ... -v-cluster to clear technical steps up.
Top
User avatar
Tarass (Staff)
Staff
Posts: 113
Joined: Mon Oct 06, 2014 10:40 am

Wed Jan 27, 2016 2:36 pm

Awesome hint, darklight, thank you!

Ivan, do you have any further questions I might help you with?
Senior Technical Support Engineer
StarWind Software Inc.
Top
Post Reply

Return to “StarWind Virtual SAN (VSAN) [+Free], HCI Appliance (HCA), Virtual HCI Appliance (VHCA) [+Free], StarWind x Proxmox VE SAN Integration Services”