Is L2 cache now stable?

Software-based VM-centric and flash-friendly VM storage + free version

Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)

jhamm@logos-data.com
Posts: 78
Joined: Fri Mar 13, 2009 10:11 pm

Wed Jul 29, 2015 2:38 pm

We are about to setup a new 2 node StarWind HA SAN to replace our old one. I have heard conflicting reports on this; is the L2 cache now fixed, stable, and ready for production use with build 8198? Any pointers on the best way to setup the L2 cache?

Thanks!
Jeff
User avatar
Jhon_Smith
Posts: 20
Joined: Thu Jun 04, 2015 9:14 am

Mon Aug 03, 2015 10:04 am

Hi,

It should be stable and ready for production, although i would recommend you waiting for next release build. If should contain major fixes and improvements for L2 cache.
jhamm@logos-data.com
Posts: 78
Joined: Fri Mar 13, 2009 10:11 pm

Wed Aug 05, 2015 2:40 pm

Is there a timetable on when the next build with the L2 cache enhancements will be released? Is it currently in beta?

Thanks!
Jeff
User avatar
Oles (staff)
Staff
Posts: 91
Joined: Fri Mar 20, 2015 10:58 am

Mon Aug 10, 2015 2:01 pm

Hello!

Yes, L2 cache is in beta now. ETA is 2 weeks.
User avatar
frufru
Posts: 19
Joined: Thu Aug 06, 2015 12:53 pm

Mon Aug 10, 2015 8:50 pm

Hello guys, how to size L1+L2 cache size for FLAT and LSFS devices (dedupe on?)?

Me i use it on production after 2weeks update?
User avatar
darklight
Posts: 185
Joined: Tue Jun 02, 2015 2:04 pm

Tue Aug 11, 2015 9:41 am

Cache sizing globally answered here: https://forums.starwindsoftware.com/vie ... 318#p24504
More information about LSFS RAM consumption and caching here: https://knowledgebase.starwindsoftware. ... scription/
User avatar
frufru
Posts: 19
Joined: Thu Aug 06, 2015 12:53 pm

Tue Aug 11, 2015 5:13 pm

Thank you for information!

I found this confusing https://www.starwindsoftware.com/techni ... al_SAN.pdf page 9: L2 Note: We recommend using SSD for L2 cache and if it will be used, the formula is 1Gb (sum of L1 and L2) cache per 1Tb storage.

L2 cache needs RAID1 configuration or RAID0 is allowed? Write-Through?

Thx
User avatar
darklight
Posts: 185
Joined: Tue Jun 02, 2015 2:04 pm

Wed Aug 12, 2015 12:10 pm

You can use any type of RAID for L2 caching i believe, and yes, WT is recommended.
Vladislav (Staff)
Staff
Posts: 180
Joined: Fri Feb 27, 2015 4:31 pm

Thu Aug 13, 2015 9:47 am

Hi guys,

Regarding cache configuration:

Basically, L2 cache should be faster than main storage. In this case, performance improvement is possible. And yes, WT mode for L2.
User avatar
frufru
Posts: 19
Joined: Thu Aug 06, 2015 12:53 pm

Thu Aug 13, 2015 7:49 pm

Hi Vitaliq,

RAID SSD configuration for L2 cache? RAID0? RAID1? Single PCIe SSD?

Thanks, frufru
Vladislav (Staff)
Staff
Posts: 180
Joined: Fri Feb 27, 2015 4:31 pm

Fri Aug 14, 2015 10:25 am

frufru,

It is up to you. I believe that PCIe SSDs are faster in most cases. My choice would be PCIe SSD.
jhamm@logos-data.com
Posts: 78
Joined: Fri Mar 13, 2009 10:11 pm

Fri Aug 21, 2015 5:58 pm

I'm a bit confused now with regards to the issues with L2 Cache. I was just reading this at the bottom of this different thread: https://forums.starwindsoftware.com/vie ... f=5&t=4333

It mentions issues with LSFS but not L2 cache? So in the current production build, are there issues with LSFS, L2 cache, or both? And, will the build in beta fix the issues with LSFS, L2 cache, or both?

Thanks!
Jeff
User avatar
darklight
Posts: 185
Joined: Tue Jun 02, 2015 2:04 pm

Tue Aug 25, 2015 9:19 am

Hi mate,

I am using LSFS without L2 cache almost half a year already. And it's performing really nice. I do not put any high load on it. Just using it as a storage for some slightly used typical Terminal Services VMs with online dedupe. And i am happy with it so far. Nevertheless also waiting for L2 cache reviewed :)
jhamm@logos-data.com
Posts: 78
Joined: Fri Mar 13, 2009 10:11 pm

Mon Aug 31, 2015 8:46 pm

Can someone from StarWind shed a little more light on this? This is holding up our SAN upgrade until we can get some definitive answers on LSFS/L2 cache stability, and how the version currently in beta will change things. Thanks! Jeff
Tarass (Staff)

Thu Sep 03, 2015 9:31 am

Hi guys,

L2 cache is stable now, feel free to enable it on your systems 8)
LSFS revamped release is coming in a week i believe.
Post Reply