Initiator (iSCSI, FCoE, AoE, iSER and NVMe over Fabrics), iSCSI accelerator and RAM disk
Moderators: art (staff), anton (staff), Anatoly (staff), Max (staff)
-
DT@EU
- Posts: 7
- Joined: Thu Oct 29, 2020 12:02 pm
Wed Nov 11, 2020 3:03 am
On Windows 2019 (uptodate) baremetal, Mellanox Connectx-6 card (latest driver as of today), the initiator successfully mounts the target, but the drive doesn't show up in disk management.
The same target mounts fine on another machine with a Connectx-4 card.
Not sure what else to do?
-
DT@EU
- Posts: 7
- Joined: Thu Oct 29, 2020 12:02 pm
Wed Nov 11, 2020 3:53 am
If others have the same issue, it was due to MultiPath.
Have to go into MPIO Properties via Server-Manager>Tools>MPIO
and on the Discover Multi-Paths tab, click "Add support for iSCSI devices", then the button 'ADD' within the "SPC-3 compliant" group.
After that, connecting mounts the drive.
---Suggestion for the devs: if possible to actually have a flag on the NVMEoF Initiator install to enable that?
-
yaroslav (staff)
- Staff
- Posts: 2665
- Joined: Mon Nov 18, 2019 11:11 am
Wed Nov 11, 2020 8:51 am
Greetings,
Installing and enabling MPIO is a mandatory step for such a deployment. Glad to know that issue was resolved easily.
Passed your request to R&D team. Thanks for your collaboration!