StarWind iSCSI SAN
StarWind Native SAN for Hyper-V
 

Delayed Write Failed and drive not ready for access on aoe

Initiator (iSCSI, FCoE, AoE, iSER and NVMe over Fabrics)

Moderators: art (staff), anton (staff), Anatoly (staff), Max (staff)

Delayed Write Failed and drive not ready for access on aoe

Postby danjaman » Mon Oct 22, 2012 8:21 pm

StarAoE Service v5.5 (Build 20091120, WinXP x86) on a Windows Server 2003 R2 SP1. On a mirror array on a Coraid Chassis, Disk are all healthy, MTU is at 9000 with jumbo frames activated on both (network card + switch).

We have multiples error on my aoe drive :
{Delayed Write Failed}
The device, \Device\Harddisk1, is not ready for access yet.

And my event viewer is full of these and it's erratic.

I need to do a chkdsk every 2-3 days because a my ntfs table is getting corrupted.

Anyone have a hint or know what may cause this problem ?

Thanks a lot
danjaman
 
Posts: 2
Joined: Mon Oct 22, 2012 8:17 pm

Re: Delayed Write Failed and drive not ready for access on aoe

Postby Anatoly (staff) » Tue Oct 23, 2012 11:15 am

Can you check the logs if you have some hardware issues/failures please?
Best regards,
Anatoly Vilchinsky
Global Engineering and Support Manager
www.starwind.com
[email protected]
User avatar
Anatoly (staff)
Staff
 
Posts: 1675
Joined: Tue Mar 01, 2011 8:28 am

Re: Delayed Write Failed and drive not ready for access on aoe

Postby danjaman » Tue Oct 23, 2012 1:00 pm

I have nothing on the starwind initiator log and theses two error (from initial post) in my event viewer.

Thanks for the reply, really appreciated
danjaman
 
Posts: 2
Joined: Mon Oct 22, 2012 8:17 pm

Re: Delayed Write Failed and drive not ready for access on aoe

Postby anton (staff) » Tue Oct 23, 2012 4:56 pm

They are not related to initiator BTW. It means initiator cannot wire the data to target so it looks like it's a target / network issue.
What do you use as a target? Also try to check network connectivity. And increase disk timeout values:

http://blogs.msdn.com/b/san/archive/201 ... value.aspx

Let us know about results. That's it...

danjaman wrote:I have nothing on the starwind initiator log and theses two error (from initial post) in my event viewer.

Thanks for the reply, really appreciated
Regards,
Anton Kolomyeytsev

Chief Technology Officer & Chief Architect, StarWind Software

Image
User avatar
anton (staff)
Site Admin
 
Posts: 3920
Joined: Fri Jun 18, 2004 12:03 am
Location: British Virgin Islands


Return to StarPort

Who is online

Users browsing this forum: No registered users and 1 guest