StarWind Software

hello,

i can not connect to a iSCSI Target with Starport.
Microsoft iSCSI works but with poor read performance.
If i try to Connect to the device with Starport (newest Version) i got the Message: Failed to connect to the Remote Server...
I have disabeld the MS Firewall but still no connection possible.

The log says:
3/20 09:46:45.187 >> CWPPiSCSIDeviceCreate::OnWizardNext()
3/20 09:46:45.187 >> CStarPortAPI::ParseAddress(csSource=192.168.102.1, dwIPAddress=..., &dwPort=...)
3/20 09:46:45.187 << CStarPortAPI::ParseAddress(csSource=192.168.102.1, dwIPAddress=..., &dwPort=...)
3/20 09:46:45.187 >> CWPPiSCSIDeviceCreate::GetTargetsList()
3/20 09:46:45.187 >> CStarPortAPI::GetTargets(dwIPAddress=0xC0A86601, DWORD dwPort=3260, listTargets=...)
3/20 09:46:45.187 CStarPortAPI::GetTargets: Calling STARPORT_IOCTL_GET_TARGETS
3/20 09:46:45.187 CStarPortAPI::GetTargets: Input buffer:
3/20 09:46:45.187 CStarPortAPI::GetTargets: ServerAddress = #iscsi:192.168.102.1:3260
3/20 09:46:45.187 CStarPortAPI::GetTargets: Parameter[0] = InitiatorName=starport:starline
3/20 09:46:45.187 CStarPortAPI::GetTargets: Session failed, status == 87 !
3/20 09:46:45.187 << CStarPortAPI::GetTargets(dwIPAddress=0xC0A86601, DWORD dwPort=3260, listTargets=...)
3/20 09:46:45.187 CWPPiSCSIDeviceCreate::GetTargetsList: Exception caught: Invalid parameter was passed to the driver.
3/20 09:46:47.218 >> CMainFrame::WindowProc(...)

Config of Server:
Windows 2008 Data Center x64, German
Fresh install, no 3rd party Software.
Protokolls:
IPv4 and StarEther Ndis - nothing else
2 Nics with standard Settings, MTU 1500
IP of Server: 192.168.102.2 and 192.168.103.2
IP of Target: 192.168.102.1 and 192.168.103.1

any idea whats going wrong ?

thanks in advance!
Juergen

No idea. Send us StarWind logs from the other (server) side.