SPTI Error - scsiPassThrough failed : the parameter is incor

Initiator (iSCSI, FCoE, AoE, iSER and NVMe over Fabrics), iSCSI accelerator and RAM disk

Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)

Post Reply
Dalbergia
Posts: 1
Joined: Wed Aug 08, 2007 10:02 am

Wed Aug 08, 2007 10:15 am

When I try to share a dvd writer over SPTI and try to connect to the device with either Microsoft iscsi port initiator or Starport
I receive the following error message : "Creation of the iSCSI device failed with all the addresses supplied by the server".

Source and Target pc's are configured with Windows XP SP2 (I followed the document "StarWind iSCSI Target: Sharing Physical CD/DVD/Blu-Ray/HD-DVD Drive over IP Network" for the configuration.

In the starwind event log i see the following error:

8/8 12:21:12.411 17a8 Params: >>> DataSequenceInOrder=Yes.

8/8 12:21:12.411 14ec T[1]: session 0x1b, connection 0x1b : end of stage 1, next stage 3.

8/8 12:21:12.411 14ec C[1b], IN_LOGIN: Event - LOGIN_ACCEPT.

8/8 12:21:12.411 14ec C[1b], LIN: T5.

8/8 12:21:12.411 14ec SPTI: '\\.\E:': scsiPassThrough failed: The parameter is incorrect. (code: 87).

8/8 12:21:12.411 14ec SPTI: '\\.\E:': IOCTL_SCSI_PASS_THROUGH_DIRECT (before):


Starwind version is 3.5 Trial / Starport version is v3.5

Does anyone have any suggestions ?
User avatar
anton (staff)
Site Admin
Posts: 4008
Joined: Fri Jun 18, 2004 12:03 am
Location: British Virgin Islands
Contact:

Wed Aug 08, 2007 12:52 pm

Please download latest StarWind build. There was indeed a problem with the SPTI. We've fixed it and published StarWind under the same version (3.5) only build number is different. Thanks and sorry!
Dalbergia wrote:When I try to share a dvd writer over SPTI and try to connect to the device with either Microsoft iscsi port initiator or Starport
I receive the following error message : "Creation of the iSCSI device failed with all the addresses supplied by the server".

Source and Target pc's are configured with Windows XP SP2 (I followed the document "StarWind iSCSI Target: Sharing Physical CD/DVD/Blu-Ray/HD-DVD Drive over IP Network" for the configuration.

In the starwind event log i see the following error:

8/8 12:21:12.411 17a8 Params: >>> DataSequenceInOrder=Yes.

8/8 12:21:12.411 14ec T[1]: session 0x1b, connection 0x1b : end of stage 1, next stage 3.

8/8 12:21:12.411 14ec C[1b], IN_LOGIN: Event - LOGIN_ACCEPT.

8/8 12:21:12.411 14ec C[1b], LIN: T5.

8/8 12:21:12.411 14ec SPTI: '\\.\E:': scsiPassThrough failed: The parameter is incorrect. (code: 87).

8/8 12:21:12.411 14ec SPTI: '\\.\E:': IOCTL_SCSI_PASS_THROUGH_DIRECT (before):


Starwind version is 3.5 Trial / Starport version is v3.5

Does anyone have any suggestions ?
Regards,
Anton Kolomyeytsev

Chief Technology Officer & Chief Architect, StarWind Software

Image
Post Reply