Page 1 of 1

iscsi target not found

Posted: Sat Dec 29, 2018 6:26 pm
by dimpets
Hello,

I've installed Star Wind Tape Redirector on the server (Windows 2012R2)that the tape drive is connected.
LSI Adapter, SAS3 2008 Fury - StorPort
IBM Ultrium-HH7 SCSI Sequential Device (Dell LTO7)
From Hyper-V Virtual Machine (Windows 2016) by running iscsi initiator and entering target address, nothing is found.
I'm already using from that VM iscsi initiator to target a NAS drive and is working fine.

Can you please advice what am I missing or doing wrong?

Thanks,

Re: iscsi target not found

Posted: Wed Jan 02, 2019 9:27 am
by dimpets
Hello,

Please, anyone with any ideas on how I can solve it?

Thanks.

Re: iscsi target not found

Posted: Wed Jan 02, 2019 1:29 pm
by Michael (staff)
Hello!
It seems that there is an issue with targets discovery. Please double check that ISCSI Target Server is not enabled: https://knowledgebase.starwindsoftware. ... d-console/
As a troubleshooting step, you can create the device and check if it appears in the initiator.

Re: iscsi target not found

Posted: Wed Jan 02, 2019 5:27 pm
by dimpets
Hello Michael,

Thank you so much for your response and suggestion.
I've checked iSCSI target server and the feature was installed. I removed the feature as it is not needed but can't reboot yet as it is stil mid day.
I'll let you know.

Thank you,

Re: iscsi target not found

Posted: Wed Jan 02, 2019 8:30 pm
by Boris (staff)
Keep the community updated.

Re: iscsi target not found

Posted: Sat Jan 05, 2019 6:27 pm
by dimpets
Hello and thank you for the support.

Your suggestion worked and initiator recognized the device.

Thank you again.

Re: iscsi target not found

Posted: Sat Jan 05, 2019 8:03 pm
by Oleg(staff)
You are welcome!