Tape Redirector - Client unable to see the Target
Posted: Mon Sep 24, 2018 3:51 am
Hello expert, I have configured the StarWind Management Console and added the target + device (tape + tape changer), however when i want to present to the client using iSCSI initiator, I couldn't see any IQN for the tape that I have configured. 
Below would be my setup:
1. Install StarWind Management Console
2. Connect server
3. Create target
4. Add device (advanced) - tape
5. Add device (advanced) - tape changer
6. Login to the client machine (Virtual - vmware) and added the server IP to iSCSI connector (unable to see any IQN from the discovered targets)
Guys, your assistant is highly appreciated.
Below would be my setup:
1. Install StarWind Management Console
2. Connect server
3. Create target
4. Add device (advanced) - tape
5. Add device (advanced) - tape changer
6. Login to the client machine (Virtual - vmware) and added the server IP to iSCSI connector (unable to see any IQN from the discovered targets)
Guys, your assistant is highly appreciated.