Can't see targets from another host

Tape drive and auto-loader redirector over iSCSI

Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)

Post Reply
Posts: 2
Joined: Sun Feb 23, 2014 10:23 am

Tue Mar 08, 2016 3:41 am


Our Virtual backup server and all other systems have stopped being able to see the iScsi target of the redirected tape drives and loader. I've also experimented with creating local Starwin Virtual disk targets. The targets can only be seen through the Microsoft initiator on the local host.

System is Server 2012 R2 with latest patches. Starwin V8. Firewall disabled, AV software disabled. There are no permissions configured. Logs show no failures.

User avatar
Anatoly (staff)
Posts: 1675
Joined: Tue Mar 01, 2011 8:28 am

Thu Mar 10, 2016 12:09 pm

Have you got MS iSCSI target installed anywhere? If so please remove it and try again
Best regards,
Anatoly Vilchinsky
Global Engineering and Support Manager
Posts: 2
Joined: Sun Feb 23, 2014 10:23 am

Tue Mar 15, 2016 6:42 am

Working now. Removed MS ISCSI target. As recommended.
Dmitry (staff)
Posts: 82
Joined: Fri Mar 18, 2016 11:46 am

Mon Mar 21, 2016 2:58 pm

Thanks a lot Anatoly, @raybrown101 please let us know if you have any additional questions.
Post Reply