Tape Redirector and Authorization Failed

Tape drive and auto-loader redirector over iSCSI

Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)

Post Reply
Joakim
Posts: 3
Joined: Mon Nov 04, 2013 10:09 pm

Mon Nov 04, 2013 10:11 pm

When I try to Connect to my iSCSI Target I got "Authorization Failed".
Cannot see whats wrong. Any thoughts?
User avatar
Anatoly (staff)
Staff
Posts: 1675
Joined: Tue Mar 01, 2011 8:28 am
Contact:

Tue Nov 05, 2013 8:51 am

Could you please provide us with full description of your SAN system and exact steps that you are following before getting this message?
Best regards,
Anatoly Vilchinsky
Global Engineering and Support Manager
www.starwind.com
av@starwind.com
Joakim
Posts: 3
Joined: Mon Nov 04, 2013 10:09 pm

Tue Nov 05, 2013 6:16 pm

I have a server running Win 2012 R2 with a HP Tape
Installed Tape Redirect and entered the license.
Followed the guide "Using StarWind Tape Redirector and CA ARCserve Backup" except that I selected "Export tape drive" instead

The iSCSI-target shows up, but I cannot connect.
User avatar
anton (staff)
Site Admin
Posts: 4008
Joined: Fri Jun 18, 2004 12:03 am
Location: British Virgin Islands
Contact:

Mon Nov 11, 2013 11:42 am

Tape Redirector uses different iSCSI port (not 3260) by default. Did you change your initiator settings to match the ones used with target?
Regards,
Anton Kolomyeytsev

Chief Technology Officer & Chief Architect, StarWind Software

Image
User avatar
Anatoly (staff)
Staff
Posts: 1675
Joined: Tue Mar 01, 2011 8:28 am
Contact:

Mon Nov 11, 2013 12:18 pm

Have you configured any access rights to target?
Best regards,
Anatoly Vilchinsky
Global Engineering and Support Manager
www.starwind.com
av@starwind.com
Joakim
Posts: 3
Joined: Mon Nov 04, 2013 10:09 pm

Mon Nov 11, 2013 8:43 pm

The target is visible so the port are correct (33268)
Authentication Type = Anonymous.
User avatar
anton (staff)
Site Admin
Posts: 4008
Joined: Fri Jun 18, 2004 12:03 am
Location: British Virgin Islands
Contact:

Mon Nov 11, 2013 9:00 pm

Please provide StarWind logs from a failed connect attempt. Thanks!
Joakim wrote:The target is visible so the port are correct (33268)
Authentication Type = Anonymous.
Regards,
Anton Kolomyeytsev

Chief Technology Officer & Chief Architect, StarWind Software

Image
Post Reply