StarWind Software

Hi Team,

I have been trying to setup mine Veem B&R with the Starwind VTL free version.
The configuration process really goes smoothly, apparently without issues.
I was able to create the Target, the VTL devices and the tapes using the powersheel scripts, and seems that everything is fine.
Configured the Windows Server 2019 to connect in the iSCSI, and after updated the LTO drivers to use the HPE one.
From inside of the Veeam, I was able to detect the new Library, and also, see the two medias available.

Now, when I try to "Inventory the tape" or "erase tape", I always receive the error Unable to perform Tape erase for library HP MSL G3 Series 9.50: cannot lock tape drive

I have been struggling on this issue along the day today....

Does someone already faced this issue? Some idea what could be the error here?

Looks like you are not alone https://forums.veeam.com/tape-f29/featu ... 68063.html.
please see this thread. Let me know if that works for you.

I have been struggling on this issue for quite a while now too and the solution above didn't solve my problem.

Welcome to StarWind Forum. Did you try contacting Veeam on those error codes?

Hello
I resolve it by updating driver of my "tape drivers" driver in device manger.
you can search the complete name of your tape driver , download and install then enjoy.
for hp ultrium 6-scsi scsi sequential device driver you can use this link :
https://downloads.hpe.com/pub/softlib2/ ... 049429.exe

Many thanks!

Hello,

I have same Error :
" Failed to inventory tape COT716L6 Error: Failed to call RPC function 'LoadMediumByScsi': Fixed format, current; Sense key: Illegal Request. Incompatible volume qualifier.
Failed to perform scsi command. CDB: a5 00 00 00 03 fe 00 01 00 00 00 00."

knowing that Drive is hp msl g3 series 7.90 LTO 8 and tape LTO6.

Case : need to restore data from old tape.

Regards,

Hi,

Is it a tape or virtual tape?
RPC server is something on the host side. Try restarting the server.