StarWind iSCSI v8.0 RC - Virtual Tape Libary

StarWind VTL, VTL Free, VTL Appliance

Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)

Post Reply
thomas bloss
Posts: 1
Joined: Wed Mar 26, 2014 7:27 pm

Wed Mar 26, 2014 7:34 pm

i tried to install a VTL, after creation i create a Media and the dialog-box will not stop to pop-off, so i have to restart the Server, after that the VTL was inactive and no Media was mounted, start the Create media Dialog - same as before . . . . . . :(
is there something wrong in the RC or missunderstud i the Funktion ?

regards

T.
User avatar
Bohdan (staff)
Staff
Posts: 435
Joined: Wed May 23, 2007 12:58 pm

Fri Mar 28, 2014 12:19 pm

Right now there is not media mount indication in StarWind Management console. That will be fixed before release. To check if the media is present you should connect the target via iSCSI initiator and make sure that tape device exists.
As for the tape creating and service restart, please zip and send us StarWind logs to check what's wrong.
Post Reply