P2V Win7 pro to VHD's Blue Screen

[Elohnroc]

This is driving me nuts.

Using StarWind I imaged the physical disks from a Win7 Pro 64b to VHD's

Physical machine has two disks:
C: - contains a system partition and the C: drive partition
E: - contains a system reserved partition and the E: drive

Upon starting the VM in VirtualBox, just after the Windows splash/startup screen, I blue screen with a 0x07b code. Is see many others having this same problem. I have re-imaged these drives several times with the same result. I have tried imaging the C: drive as one disk, as well as the partitions individually, with the same results. I have attempted to change the storage controller to other controlers, i.e., SATA, IDE, etc with no change in outcome.

I have done this before with other similar Win7 machines with no issues. This Physical machine starts up and functions with no hardware issues.

For the life of me, I can not figure out what is going on here. Any help in next-step troubleshooting would be appreciated. Attaching logs from latest Virtual Box startup attempt.

[yaroslav (staff)]

Greetings,

Please try running conversion in a repair mode.

[Elohnroc]

Thank you. Not sure what that means, I assume it means during the conversion of disks to VHD's there is a repair mode. I will find details on how-to and report back results.

Thanks again.

kd

[yaroslav (staff)]

Greetings,

While doing P2V Conversion there should be an option to run in the repair mode.