StarWind iSCSI SAN
StarWind Native SAN for Hyper-V
 

V2V VMware to HyperV

VM image converter (VMDK, VHD, VHDX, IMG, RAW, QCOW and QCOW2)

Moderators: art (staff), anton (staff), Anatoly (staff), Max (staff)

V2V VMware to HyperV

Postby capakito » Thu Jan 23, 2020 2:28 pm

hello, i am planinng to use V2V converter and i have a question.
i need to convert VMware VM to HyperV. The VM has more than one disk, so my question is if i can convert the VM with the attached disk? Or i have to convert every disk separately?
thank you
capakito
 
Posts: 5
Joined: Thu Jan 23, 2020 2:24 pm

Re: V2V VMware to HyperV

Postby yaroslav (staff) » Thu Jan 23, 2020 3:05 pm

Greetings,

You can convert the VM together with all its disks in one go.
yaroslav (staff)
Staff
 
Posts: 61
Joined: Mon Nov 18, 2019 11:11 am

Re: V2V VMware to HyperV

Postby capakito » Fri Jan 24, 2020 8:11 am

Thank you first of all. After the conversation process will be created one VHD(X) or as many as i had on VMware?
capakito
 
Posts: 5
Joined: Thu Jan 23, 2020 2:24 pm

Re: V2V VMware to HyperV

Postby yaroslav (staff) » Fri Jan 24, 2020 8:38 am

It is a pleasure to help you.
There will be as many VHD(X) drives as you had on ESXi VM.
yaroslav (staff)
Staff
 
Posts: 61
Joined: Mon Nov 18, 2019 11:11 am

Re: V2V VMware to HyperV

Postby capakito » Fri Jan 24, 2020 8:54 am

Thank you Yaroslav for info!
capakito
 
Posts: 5
Joined: Thu Jan 23, 2020 2:24 pm

Re: V2V VMware to HyperV

Postby yaroslav (staff) » Fri Jan 24, 2020 9:22 am

You are always welcome.
yaroslav (staff)
Staff
 
Posts: 61
Joined: Mon Nov 18, 2019 11:11 am

Re: V2V VMware to HyperV

Postby capakito » Fri Jan 24, 2020 9:59 am

After successfully connection with StarWind from Hyperv(where is installed the converter) to Esxi, i am getting the error
ERROR OPENING IMAGE
THE SERVER REFUSED CONNECTION.

The VM is powered off.

Any suggestions...
capakito
 
Posts: 5
Joined: Thu Jan 23, 2020 2:24 pm

Re: V2V VMware to HyperV

Postby yaroslav (staff) » Fri Jan 24, 2020 10:31 am

Did you login with root credentials?
Can the target server accept remote connections?
Did you get to the stage of VM selection?
yaroslav (staff)
Staff
 
Posts: 61
Joined: Mon Nov 18, 2019 11:11 am

Re: V2V VMware to HyperV

Postby capakito » Fri Jan 24, 2020 10:58 am

Problem resolved. there was network restrictions.

thank you
capakito
 
Posts: 5
Joined: Thu Jan 23, 2020 2:24 pm

Re: V2V VMware to HyperV

Postby yaroslav (staff) » Fri Jan 24, 2020 11:13 am

Happy to know that everything works as it should now. Should you have any questions, I am here to help.
yaroslav (staff)
Staff
 
Posts: 61
Joined: Mon Nov 18, 2019 11:11 am


Return to StarWind V2V Converter

Who is online

Users browsing this forum: No registered users and 1 guest