SSH Connection to Proxmox not using the server adress entered in GUI..

[christoffer1984]

Default it looks like when you connect to Proxmox on a different IP/Server address then the host is using HTTP (8006) works.
But SSH doesnt in the logs it tries to connect to the hosts ip adress not what you entered in the server connection.
One option to override this default behaviour similar to this: "use this server address for ssh" would be good.
And should it be possible when you connect to the proxmox host that it checks already then if there is access on the ssh port, simple port open check?
Because now it creates the vm etc before it fails, and it should fail already then in my opinion "SSH not responding".

TLDR:
An option to use the IP/server address you enter to the Proxmox host in the gui, to use that for SSH as well. Not only http (8006).

xx.xx.xx.xx here in the logs is not the Server address i used to connect to Proxmox:
2/10 14:19:21.245 1b8c Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::ConnectSSH: Attempting connection to xx.xx.xx.xx...
2/10 14:19:42.269 1b8c Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::ConnectSSH: Connect failed for xx.xx.xx.xx. WSA=10060 (A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
)
2/10 14:19:42.269 1b8c Facility ???ERROR: Proxmox::WrapperProxmox::WrapperProxmoxImpl::ConnectSSH: TCP connect failed: WSA=10060 (A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

[yaroslav (staff)]

Check this build https://starwind.my.salesforce.com/sfc/ ... XlX0Tfgtsw.
They improved things with ssh logins, I believe.

[christoffer1984]

I already downloaded that from another thread here in the forums (thats how i could see more details in the logs).

[yaroslav (staff)]

I have pushed your request to the dev team. Thanks for your suggestions.

[EmanuelDSterns]

Check this build https://starwind.my.salesforce.com/sfc/ ... XlX0Tfgtsw
They improved things with ssh logins, I believe.

The information you shared is very useful, thank you so much!

[ultimateaffair]

Thank you for sharing this helpful information!

[excelsi84]

Check this build https://starwind.my.salesforce.com/sfc/ ... XlX0Tfgtsw.
They improved things with ssh logins, I believe.

Thanks for this 850 Build.

But the issue in this build is that he takes the full size of a Dynamic Hyper-V Disk (which is by default 127 GB) as required for a migration and not the used size of the disk (also if i tick the option "Shrink Size").

Build 848

Code: Select all

10/10 18:44:50.366 1da4 Facility ???INFO: CPPConverting::Convert: Converting VM "pfsense" (1 of 1)
10/10 18:44:50.366 1c3c Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::CreateVM: CreateVM attempt 1/10
10/10 18:44:50.366 1c3c Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::CreateVM: Set disks
10/10 18:44:50.366 1c3c Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::CreateVM: disk name scsi0, local-lvm:32.000000,format=raw
10/10 18:44:50.366 1c3c Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::isEnoughSpace: disk name disk size = 32.000000 Gb
10/10 18:44:50.366 1c3c Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::isEnoughSpace::<lambda_ff13655038bc08377f040195fc2d064a>::operator (): l
10/10 18:44:50.366 1c3c Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::isEnoughSpace::<lambda_ff13655038bc08377f040195fc2d064a>::operator (): ......
10/10 18:44:50.366 1c3c Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::isEnoughSpace: storage is found

Build 850

Code: Select all

10/10 18:55:12.027 1cd4 Facility ???INFO: CPPConverting::Convert: Converting VM "pfsense" (1 of 1)
10/10 18:55:12.027 2aa0 Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::CreateVM: CreateVM attempt 1/10
10/10 18:55:12.027 2aa0 Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::CreateVM: Set disks
10/10 18:55:12.027 2aa0 Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::CreateVM: disk name scsi0, local-lvm:127.000000,format=raw
10/10 18:55:12.027 2aa0 Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::isEnoughSpace: disk name disk size = 127.000000 Gb
10/10 18:55:12.027 2aa0 Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::isEnoughSpace::<lambda_ff13655038bc08377f040195fc2d064a>::operator (): l
10/10 18:55:12.027 2aa0 Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::isEnoughSpace::<lambda_ff13655038bc08377f040195fc2d064a>::operator (): .hQ...
10/10 18:55:12.027 2aa0 Facility ???INFO: Proxmox::WrapperProxmox::WrapperProxmoxImpl::isEnoughSpace: storage is found
10/10 18:55:12.027 2aa0 Facility ???ERROR: Proxmox::WrapperProxmox::WrapperProxmoxImpl::CreateVM: Not enough space
10/10 18:55:12.027 1cd4 Facility ???ERROR: CPPConverting::Convert: FAILED

[yaroslav (staff)]

Please output it to some intermediate host (i.e., individual disk conversion, not VM).
Please wait for the future builds to come.