StarWind iSCSI SAN
StarWind Native SAN for Hyper-V
 

Convertor starts but stays at 0%

VM image converter (VMDK, VHD, VHDX, IMG, RAW, QCOW and QCOW2)

Moderators: art (staff), anton (staff), Anatoly (staff), Max (staff)

Convertor starts but stays at 0%

Postby davidmatthewson » Mon May 18, 2020 12:58 pm

Hi

I've used the SW convertor in the past with good results and downloaded the current version to convert a P2V Windows 10 x 64 to ESX 6.7u3 system. It installed on the clean W10 box OK and seemed happy with the config to convert C$ and machine to ESX.

Started it off and the % stays at 0. An hour later I retried, same result. Log below, edited for GDPR.

The log file name: 'logs\V2V_Log-20200518-133154.log' (PID 9616)
5/18 13:31:54.742 2ac4 Facility ???INFO: CV2V_ConverterApp::InitInstance: SetDllDirectory: C:\Program Files\StarWind Software\StarWind V2V Converter\lib
5/18 13:31:54.742 2ac4 Facility ???INFO: CV2V_ConverterApp::InitInstance: File Version: 9.0.0.202
5/18 13:31:54.742 2ac4 Facility ???INFO: CV2V_ConverterApp::InitInstance: Load language IDR_XML_ENGLISH
5/18 13:31:54.742 2ac4 Facility ???INFO: CV2V_ConverterApp::InitInstance: Load language IDR_XML_RUSSIAN
5/18 13:31:54.742 2ac4 Facility ???INFO: CV2V_ConverterApp::InitInstance: Set current language English
5/18 13:31:54.758 2ac4 Facility ???INFO: CPS_V2V_Converter::CPS_V2V_Converter: Version MajorVersion 10, MinorVersion 0, BuildNumber 18363
5/18 13:31:54.758 2ac4 Facility ???INFO: WrapperHyperV::WrapperHyperV: LoadLibrary C:\WINDOWS\system32\wbem\wmiutils.dll - 973a0000
5/18 13:31:54.758 2ac4 Facility ???INFO: WrapperHyperV::WrapperHyperV: LoadLibrary C:\WINDOWS\system32\wbem\wmiutils.dll - 973a0000
5/18 13:32:00.164 2ac4 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eTypeP2V
5/18 13:32:05.102 2ac4 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eVolumeSelectVM
5/18 13:32:19.977 2ac4 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eLocationTo
5/18 13:32:22.242 2ac4 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eESXConnectionTo
5/18 13:33:11.102 2ac4 Facility ???INFO: WrapperESXI::connect: m_url - https://192.168.0.7/sdk
5/18 13:33:11.164 2ac4 Facility ???INFO: WrapperESXI::connect: fullName - Administrator xxxxx, key - xxxxx
5/18 13:33:11.195 2ac4 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eVMSettingsESX
5/18 13:33:23.742 2ac4 Facility ???WARNING: ESXiSelectFolderDlg::FillItemExpanded: HttpQueryInfo /folder?dcPath=ha-datacenter&dsName=LL-01 - 0. The operation completed successfully.
5/18 13:33:23.820 2ac4 Facility ???WARNING: ESXiSelectFolderDlg::FillItemExpanded: HttpQueryInfo /folder?dcPath=ha%2ddatacenter&dsName=LL-01 - 0. The operation completed successfully.
5/18 13:33:23.898 2ac4 Facility ???WARNING: ESXiSelectFolderDlg::FillItemExpanded: HttpQueryInfo /folder?dcPath=ha%252ddatacenter&dsName=LL-01 - 0. The operation completed successfully.
5/18 13:33:23.898 2ac4 Facility ???WARNING: ESXiSelectFolderDlg::FillItemExpanded: strTemp is empty
5/18 13:33:43.617 2ac4 Facility ???INFO: VMConverter::ESXIConverter::GetHostListInfo: ESX version: 6.7.0
5/18 13:33:43.648 2ac4 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eConverting
5/18 13:33:43.664 2084 Facility ???INFO: CPPConverting::Convert: InConvertType: 3, OutConvertType: 6
5/18 13:33:43.664 2084 Facility ???INFO: CheckFileESX::CheckFileExistance: /folder/Loki-C$/HDD2.vmdk?dcPath=ha-datacenter&dsName=LL-01
5/18 13:33:43.758 2084 Facility ???INFO: CheckFileESX::CheckFileExistance: state - 404

The 404 do not look good- where do I go from here pls?

Many thanks

David
davidmatthewson
 
Posts: 6
Joined: Sun Aug 07, 2016 12:07 pm

Re: Convertor starts but stays at 0%

Postby davidmatthewson » Mon May 18, 2020 1:04 pm

OK, if I wait longer, I get a fail in the logs.

5/18 13:59:32.184 2084 Facility ???ERROR: WrapperESXI::Wait: response.returnval is null
5/18 13:59:32.184 2084 Facility ???INFO: VMConverter::ESXIConverter::CreateVM: createVM is false, Wait For Updates is fail
5/18 13:59:32.199 2084 Facility ???ERROR: CPPConverting::ConverterESX: Create VM Wait For Updates is fail
5/18 13:59:32.231 2084 Facility ???ERROR: CPPConverting::Convert: FAILED

All help much appreciated!

Thanks

D
davidmatthewson
 
Posts: 6
Joined: Sun Aug 07, 2016 12:07 pm

Re: Convertor starts but stays at 0%

Postby yaroslav (staff) » Mon May 18, 2020 4:07 pm

Hi davidmatthewson,

WARNING: ESXiSelectFolderDlg::FillItemExpanded: HttpQueryInfo

That's quite unusual error, I'd say.

Could you tell me how you filled Path to virtual machine field?
yaroslav (staff)
Staff
 
Posts: 218
Joined: Mon Nov 18, 2019 11:11 am

Re: Convertor starts but stays at 0%

Postby davidmatthewson » Fri May 22, 2020 11:43 am

OK, thanks for the replay & apologies for the late reply. I think the problem was me not the s/w. As the target I used the vCenter appliance IP and not the Host IP. So in terms of the target dir, I used 'browse' and then all I saw was the datastore, which I selected.

Using the Host and not vCentre as the target, I see dirs in the datastore and can select one.

If I do that, the conversion seems to run. The GUI now shows 'stuff' and the bar is at 2% - the logs show (sample) below which looks good.

5/22 12:34:17.763 35d0 Facility ???INFO: VMConverter::ESXIConverter::GetHostListInfo: ESX version: 6.7.0
5/22 12:34:17.879 35d0 Facility ???INFO: ICPPage::OnWizardNext: SetActivePage - eConverting
5/22 12:34:17.889 36d0 Facility ???INFO: CPPConverting::Convert: InConvertType: 3, OutConvertType: 6
5/22 12:34:17.890 36d0 Facility ???INFO: CheckFileESX::CheckFileExistance: /folder/Loki/MyPC/HDD0.vmdk?dcPath=ha-datacenter&dsName=LL-01
5/22 12:34:17.933 36d0 Facility ???INFO: CheckFileESX::CheckFileExistance: state - 404
5/22 12:34:17.934 36d0 Facility ???INFO: CheckFileESX::CheckFileExistance: /folder/Loki/MyPC/HDD1.vmdk?dcPath=ha-datacenter&dsName=LL-01
5/22 12:34:17.958 36d0 Facility ???INFO: CheckFileESX::CheckFileExistance: state - 404
5/22 12:34:17.958 36d0 Facility ???INFO: CheckFileESX::CheckFileExistance: /folder/Loki/MyPC/HDD2.vmdk?dcPath=ha-datacenter&dsName=LL-01
5/22 12:34:17.982 36d0 Facility ???INFO: CheckFileESX::CheckFileExistance: state - 404
5/22 12:34:18.203 36d0 Facility ???INFO: VMConverter::ESXIConverter::CreateVM: createVM is true, 20
5/22 12:34:18.203 36d0 Facility ???INFO: CPPConverting::ConverterESX: Create VM 20
5/22 12:34:18.342 36d0 Facility ???INFO: CPPConverting::ConvertImage: pathInput: 0, pathOutput: [LL-01] Loki/MyPC/HDD0.vmdk
5/22 12:34:18.343 36d0 Facility ???INFO: P2V::CreateInputImage: path 0
5/22 12:34:18.343 36d0 Facility ???INFO: P2V::CreateInputImage: Size 0 - 400088457216, BytesPerSector - 512
5/22 12:34:29.324 36d0 Facility ???INFO: CPPConverting::ConvertImage: CreateInputImage: 0
5/22 12:34:30.487 36d0 Facility ???INFO: ESXVmdk::ParseFile: sFilename - [LL-01] Loki/MyPC/HDD0.vmdk
5/22 12:34:30.487 36d0 Facility ???INFO: ESXVmdk::ParseFile: m_cSSLThumbprint - A3:8F:10:75:A9:4D:B8:D7:EE:92:44:AF:73:90:D1:F8:FC:A7:B2:77
5/22 12:34:30.487 36d0 Facility ???INFO: ESXVmdk::ParseFile: m_cvmxSpec - [LL-01] Loki/MyPC/MyPC.vmx
5/22 12:34:31.128 36d0 Facility ???INFO: CPPConverting::ConvertImage: CreateOutputImage: 0
5/22 12:34:31.228 36d0 Facility ???INFO: P2V::getSectorsNext: countClusters - 12209680, dwCountBytes - 12209680

Many thanks - I'll update this when the conversion finishes.

D.
davidmatthewson
 
Posts: 6
Joined: Sun Aug 07, 2016 12:07 pm

Re: Convertor starts but stays at 0%

Postby yaroslav (staff) » Fri May 22, 2020 12:19 pm

Great! Happy to know that.
Actualy, that would be one of the things we would check :D
Please make sure to convert the VM to the ESXi host. Keep us posted on this case.
yaroslav (staff)
Staff
 
Posts: 218
Joined: Mon Nov 18, 2019 11:11 am


Return to StarWind V2V Converter

Who is online

Users browsing this forum: No registered users and 2 guests