Hello Kimberly,
Did you try to boot converted vhd(x) VM with both Generations?
I mean, if your VMware VM was "BIOS booting" it should be generation 1. If it was a UEFI/EFI it should be generation 2.

Dear xy67, Thanks for your reply. Over-provisioning is 200% (LSFS files can occupy 3 times more space compared to initial LSFS size) and to avoid any troubles in the future this we need to create 596 GB LSFS Device. I am not sure I understand you properly. How do you want present 1.7 TB storage (if ...

Hello chrisguk,
Thanks for update. Glad to hear that!

Hello KPS,
I will create a feature request to our R&D and I believe it will be available sometime in the near future.
Thanks.

Hello chrisguk, Thanks for your interest in StarWind solution. Could you, please, remove this images and try to run script with following changes: $firstNode.SyncInterface = "#p2=10.10.3.82:3260" $firstNode.SyncInterface = "#p2=10.10.4.82:3260" $firstNode.HBInterface = "#p2=...

Hello xy67, Regarding ReFS: Of course, you can use ReFS instead of NTFS. But, ReFS is a new file system and it can be "unstable". In you case, I would recommend to use NTFS. If your total size of Underlying storage is 1788 GB we can calculate maximum recommended size of LSFS. 1788/3 = 596 ...

Hello mpastore, Could you please check the IPs on your script? $firstNode.SyncInterface = "#p2=10.120.120.69:3260" $firstNode.HBInterface = "#p2=10.120.120.69:3260" #p2 - should be IP from SECOND node $secondNode.SyncInterface = "#p1=10.120.120.224:3260" $secondNode.HBI...

Hello xy67, In your case I would recommend you to use RAID-5 instead of RAID-10, but if the capacity is not important for you, yes, RAID-10 is the best choice. If you want to use LSFS with deduplication you need to calculate total RAM memory for LSFS device. For example: Let's imagine you have an 10...

Hello makoto.climb,
Thanks for your reply.
Could you please convert or re-add disk to VSA from Lazy Zeroed to Eager Zero provisioning type and try create datastore one more time.
Please keep us updated

Hello mpastore,
Thanks for your interest in StarWind solution.
Could you try to create simple ImageFile via powershell and share with us the results?
Also, try to change size of partner from 256 to 1024.

Hello tig_jeff,
Thanks for your interest in StarWind solution.
Yes, you are right. The Web console will not be available after 30 days as well as StarWind Management console

Hello EnterP,
Thanks for your interest in StarWind solution.
If OnApp supports qcow2 or any supported virtual disk standard format (vmdk, img, vhdx, vhd) you can convert the virtual disks from OnApp to KVM (qcow2), VMware (vmdk), Xen (img).

Hello tig_jeff,
Thanks for your interest in StarWind solution.
Could you share with us log file?
Also, you can try to install VC_redist.x64.exe. You can download from: http://go.microsoft.com/fwlink/?LinkID=615460

Hello makoto.climb,
Thanks for your interest in StarWind solution.
Could you provide us with more information about your issue? What type of provisioning are you using while adding disks to VSA?

Update for community:
The issue have been resolved by unchecking Read-only flag in .IMG file properties.