Hi all, sorry to warm up the older thread. Is the telnet login available in the NFR Version of the sphere aplliances? I only get: StarWind Virtual Storage Appliance v8.0.0 (Build 12859, [SwVSA], Win64) Copyright (c) StarWind Software 2003-2017. All rights reserved. login root starwind 104 Command re...

looks i don't need to.
in my case the replica was created with the same caching as the original.
I checked the swdsk files.

perfect thanx

Hi,

if i create a new device with caching and add a replica, the replica is added without caching.
How can I add a cached replica?

TIA
.d

Hi,

can I change the cache settings to write-back after the device was created?

TIA
.d

Hi, following setup: host1 hosts vsan1 on local datastore host2 hosts vsan2 on local datastore the ps1 script sets the multi path on vmware to round robin. Is it possible to set the preferred path for host1 to vsan1 only if this fails to vsan2 and the preferred path for host2 to vsan2 only if this f...

Host1 storage vmkernel adapter: 172.16.16.7 Host2 storage vmkernel adapter: 172.16.16.8 SW VM1 iscsi adapter: 172.16.16.181 SW VM2 iscsi adapter: 172.16.16.182 - StarWind VM1 to StarWind VM2 over the iSCSI link; sometimes... - host 1 to host 2 over the iSCSI vmkernel; yes - StarWind VM1 to host 1 vm...

i'm using the version which runs on linux, it was imported via a ova.

I'm able to ping each svsan machine from each host using the vmkernel adapter.

1 vswitch for the vmnetwork / Management
1 vswitch for the iscsi network with 1 kernel port on each host
1 vswitch for mirror

any other suggestion?
having only one path to the device is a single point of failure.

all targets, all interfaces, allow
on both servers

i deleted the target, created a new one, followed the documentation, double checked everything, still only one path to the target.

Any suggestion?

maybe the pictures show it a little bit better.
nevermeind the iqn's, I've test PetaSAN before and left the dns entries.

I followed the setupp guide, but now i see only one iscsi path to the target.
i should see both vis as paths to the target, i can only see the first one.

Hi all, I'Ve received my NFR Version of VSAN for vsphere. Installation worked fine except that I only have one path to the target. Multipath seems not to work. I've set it up using this doc: https://www.starwindsoftware.com/resource-library/starwind-virtual-san-hyperconverged-2-node-scenario-with-vm...