Thank you Yaroslov for the email. It was very thorough and I will follow the recommended restart procedure and the additional POA you provided. I noticed that the time zone was incorrectly set on Node3. Node 3 ran for 1 hour before I rebooted it in an effort to resolve the problem. Node2 restart: 20...

Thank you for your help yaroclav. I've emailed both zipped files to support@starwind.com

I work for a 24-7 call center and have had great success with Starwinds VSAN product. Being able to move VMs between Hyper-V hosts with minimal downtime and then perform updates has been a life saver. A few months ago I had to rebuild a RAID array after hardware failure. When complete I added the ne...

Is there a place I could download different versions of VSAN? I worry that going straight to the latest version might not be a good idea, even if it's just for the Libraries.

Thank you,

I was wondering if updating only the Integrated Component Library would work. That's great, I'll go that route and update software after.

Hi Yaroslav,

I'm receiving the error "A positional parameter cannot be found that accepts the argument 'Node'" when I run AddHaPertner. Is this because the version I'm running predates the AddHaPartner script (it wasn't included in the powershell folder).

Thank you

Just checking to see if I'm on track here? .CFG files from failed server <device file="My Computer\X\witness\witness.swdsk" node="-1" name="imagefile1"/> <device name="HAImage1" OwnTargetName="iqn.2008-08.com.starwindsoftware:node1-witness" file=&quo...

Thank you,

If you could provide a copy of the powershell script that would be great.

Thank you Yaroslav,

It looks like I'm missing the AddHaPartner.ps script in the version I'm running. I could download a newer version and get the script, would that cause any problems?

Thanks again

Morning all, I provide support for a small call center and back in 2017/2018 configured a 2 Node StarWind VSAN (Free) on a couple servers then setup them up to be HyperConverged Hyper-V. After some initial issues the system has run flawlessly. This past week the unthinkable happened. A RAID drive fa...

Thank you Boris, I've got a plan to give the servers a 10 Gbps server to server connection for ISCSI this weekend. I'll update this thread with new benchmarks when complete.

The ISCSI target is using a NIC team, would that cause problems?

What would you expect to see for IOPS using starwind with a 12 10K disk Raid 10 array?

Sounds like it should be doing better, I just check it is a fixed disk. What else should I be looking at?

Disk Description:
System Specs
Server 2016
2 x Dell R720
12 x Hitach Ultrastar HUC106060CSS600
Perc H710 Mini

Hello All, I'm running some diskspd tests on our Starwind HA Cluster. I have 12 2.5 inch hard drives (10K - 600G) configured in Raid 10. It's a clustered Hyper-V environment. Testing from inside VM yields the following results for random 4k reads and writes. I think these results are par for spindle...