Hi, In a hyperconverged 3-node scenario, which targets should I connect to the Witness device? In the tutorial (https://www.starwindsoftware.com/resource-library/starwind-virtual-san-hyperconverged-2-node-scenario-with-hyper-v-server-2016) for a 2-node, there is a text that says: NOTE: It is recomme...

Hi, I've a 3-node cluster using StarWind Virtual SAN FREE, so I'm using the Management Console in read-only mode, and I use PowerShell to actually manage Virtual SAN. Today one of the HDDs crashed. The HADevice is still working, but there is an error message "Partner 'iqn.xxxxxxx' is not synchr...

Hi Boris, Thanks for your response. 2 nodes: Everything is fine except for you will need to buy not a single-port 10 Gbit card, but a dual port 10 Gbit card. The reason for this is that you will need to have a separate link for Synchronization channel (StarWind only) and another one for iSCSI (data ...

Hi Boris, Here are the images: 1. The current setup with 1 Synology and 3 Hyper-V nodes current.PNG 2. The new setup with 2 Synologys and 2 nodes (Virtual SAN + Hyper-V) new-2-node.PNG 3. The new setup with 2 Synolgoys and 3 nodes (2 Virtual SAN + 3 Hyper-V): new-3-nodes.PNG Do you think that is pos...

Hi, We currently have a 3 node Hyper-V Failover Cluster. Each node is connected with a 1Gb LAN to the office network, and with a second 1 Gb LAN to an isolated network, using iSCSI, to a Synology DS1813+, with 6x4TB drives in RAID10 and 2x256GB SSD as SSD cache. This setup is working fine, and the p...