So now that Server 2012 RTM is out, what is the word for this? I am wondering if I can do this between 2 or 3 2012 rtm hosts, each with the following:
-Intel i5 2500k
-32gb mem each
-6 intel 1gbe ports teamed running trunk links with lacp port channel, and virtual adapters for each vlan as well as QoS for the replication iSCSI traffic having majority of bandwidth. All are connected to Cisco 3750G-24T switch. 6 GbE links per host should provide pretty nice bandwith for whatever. Jumbo Frames are enabled. Check here for more info http://www.aidanfinn.com/?p=12588
about 4 disks each in raid 0 ( i may change that later, but for know that is what i have) I would like to run raid 10, but that gets expensive pretty fast for a home lab! Also, what about storage spaces to run the iscsi disks? good idea, not a good idea?
Also, what is the "offical" work for netsh configuration of nics in hyper-v for 2012 rtm?
Also, in anticipation of SSD cache that you are hopefully working hard on, between each admin, what is the preference for setting up the disks so when that comes out in beta i can test right away?
And what would you like me to test if anything? I am going to rebuild this weekend, so best tips and tricks for this would be awsome!
The Latest Gartner® Magic Quadrant™Hyperconverged Infrastructure Software