I'm trying to configure starwind tape redirector to connect VM's running on Hyper v to tape drive through Iscsi connection, when i installed the SW.
I created the target and connected the tape device to it, but i'm unable to connect through iscsi initiator i got authorization failure, when i remove device from target here i can connect to the taget through initiator.
but at both i cant see any additional device in device manager except tape drive.
note that the authontication is anonymous.
find below the log file.
4/29 14:38:46.467 2ea8 Srv: Accepted iSCSI connection from 100.100.2.52:56778 to 100.100.2.52:33268. (Id = 0x26)
4/29 14:38:46.467 2ea8 C[26], FREE: Event - CONNECTED.
4/29 14:38:46.467 2ea8 C[26], XPT_UP: T3.
4/29 14:38:46.467 2440 C[26], XPT_UP: Login request: ISID 0x400001370000, TSIH 0x0000.
4/29 14:38:46.467 2440 C[26], XPT_UP: Event - LOGIN.
4/29 14:38:46.467 2440 C[26], IN_LOGIN: T4.
4/29 14:38:46.467 2440 Params: <<< String param 'InitiatorName': received 'iqn.1991-05.com.microsoft:hv-3', accepted 'iqn.1991-05.com.microsoft:hv-3'
4/29 14:38:46.467 2440 Params: <<< Enum param 'SessionType': received 'Normal', accepted 'Normal'
4/29 14:38:46.467 2440 Params: <<< String param 'TargetName': received 'iqn.2008-08.com.starwindsoftware:hv-3-tape', accepted 'iqn.2008-08.com.starwindsoftware:hv-3-tape'
4/29 14:38:46.467 2440 Params: <<< Enum param 'AuthMethod': received 'None', accepted 'None'
4/29 14:38:46.467 2440 T[26,1]: *REJECT*: SPTI device '\\?\usbstor#sequential&ven_hp&prod_c5683a&rev_yu8b#48553106014e5547&0#{53f5630b-b6bf-11d0-94f2-00a0c91efb8b}' in target 'iqn.2008-08.com.starwindsoftware:hv-3-tape' can't be accessed from the local machine (100.100.2.52)!
4/29 14:38:46.467 337c C[26], IN_LOGIN: Event - LOGIN_REJECT.
4/29 14:38:46.467 337c C[26], FREE: T7.
4/29 14:38:46.467 2440 C[26], FREE: recvData returned 10058
The Latest Gartner® Magic Quadrant™Hyperconverged Infrastructure Software