StarWind VTL, VTL Free, VTL Appliance
Moderators: art (staff), anton (staff), Anatoly (staff), Max (staff)
-
delmarth
- Posts: 1
- Joined: Fri Jul 09, 2021 4:30 pm
Fri Jul 09, 2021 4:43 pm
Hi,
I have VTL Free working with Veeam but the transfer speed never pass 2 MB/s.
Created an virtual disk in the same disk where VTL Tapes are located and mounted at Veeam Server, and could transfer files near 200 MB/s.
So the problem is on VTL. Is there anything to be bone to achieve higher transfer speeds?
-
anton (staff)
- Site Admin
- Posts: 4010
- Joined: Fri Jun 18, 2004 12:03 am
- Location: British Virgin Islands
-
Contact:
Tue Feb 27, 2024 1:29 pm
We need to check your configuration to find a bottleneck. For now it's either network or for some reason source can't feed the data faster. Start with some network usage monitor on both client & server. Microsoft Network Monitor is old, but very usable still.
https://www.microsoft.com/en-us/downloa ... px?id=4865
Regards,
Anton Kolomyeytsev
Chief Technology Officer & Chief Architect, StarWind Software
![Image](https://forums.starwindsoftware.com/images/anton_staff.gif)
-
asshley675
- Posts: 5
- Joined: Tue Jul 02, 2024 12:53 pm
- Location: Thailand
Thu Jul 04, 2024 5:40 am
Hello there
You should consider checking the network configuration between your VTL and Veeam server. Ensure that the network bandwidth is sufficient and that there are no network bottlenecks. Additionally, optimizing the VTL software settings and checking for any resource constraints on the VTL server itself could also help. Gathering more details about your setup would be beneficial in diagnosing the issue further.