Sorry to update again,

I had done the test setup in VMware Workstation and it worked, but now when I try setting up on an ESXi server it wouldn't work, same issue as before.

The ESXi version is ESXi-7.0U2a-17867351

Thanks, I got it working by following this link https://www.starwindsoftware.com/resource-library/starwind-management-console-vsphere-web-plug-in-installation-guide/ instead of https://www.starwindsoftware.com/resource-library/starwind-san-and-nas/ . Basically not starting the initial setup with htt...

The VM was restarted more than once, the vCenter was restarted. Anyway I have had a lookup, correct me if I'm wrong. The vCenter plugin allows the Storage Appliance UI to be displayed within the vCenter pages, meaning I can do configurations from within vCenter. If thats the case then I can simply c...

So I deleted 2 virtual disks and now it shows 50% space used, can I know if this means thats here space used refers to the number of disks configured instead of the free space of the disks ?!

The Storage Appliance is running as a VM with Disk directly attached to the Storage Appliance.

I have checked the firewall logs, the ports are not blocked either.

vCenter Server 7.0 Update 2 Build 17694817

Sorry vCenter version is 7.0U2..

Both vCenter and Storage can ping each other. vCenter - w-vcsa-sddc / 192.168.10.40 Storage - d-nas-strg-01 / 10.0.20.70 root@w-vcsa-sddc [ ~ ]# ping 10.0.20.70 PING 10.0.20.70 (10.0.20.70) 56(84) bytes of data. 64 bytes from 10.0.20.70: icmp_seq=1 ttl=62 time=1.83 ms 64 bytes from 10.0.20.70: icmp_...

Not sure why, but I removed the disk and reconfigured it, and its showing full space now but the dashboard still shows 100% of storage used even though nothing is stored in them.

Hi, I just installed the SAN and NAS free version, one of the 2 disks' free space is just too low, the disk is 347GB usable capacity but only 19GB is available ? I'm using Stripe only, this is a test environment. Not sure if this is any misconfiguration. https://i.ibb.co/DryDx7R/W-SRV-ADDC-01-2021-0...

Hi, I have the free NAS and SAN storage appliance and in the initial configuration the vCenter plugin failed with the error refused to connect. Once the configuration completed, even from within the settings page I'm unable to connect. https://i.ibb.co/RYcCkQT/W-SRV-ADDC-01-2021-07-24-15-56-19.png h...

Hi,

I wanted to know how to add Windows Server CA certificate to the SAN and NAS free, could not find anything in the Web UI.

Thank You

Thanks, got it up and running..

Thanks,

I'll check that also if I may ask why the appliance does not set the IP assigned during configuration, shows IP instead as 127.0.0.2 ?